11 material differences · fewer than 12
Tractor oneAgco RT-1352004–2005No measured PTO figureTractor twoFendt Vario 514from 2013No measured PTO figure
Which should you choose?
Read our verdict on the RT-135 and the Vario 514 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | RT-135 | Vario 514 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 133.2 hp | 133 hp | — |
| Engine declared | CUMMINS 6 BTA 6.7 | Deutz TCD 4.1 L4-4V | differs |
| Displacement declared | 6.83 L | 4.04 L | +69% RT-135 |
| Maximum torque declared | 530 lb·ft · 719 N·m | 479 lb·ft · 649 N·m | +11% RT-135 |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 31.1 mph · 50 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 30.6 gpm · 115.8 L/min | — | — |
| Pressure declared | 3,336 psi · 230 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 15,525 lb · 7,042 kg | 14,110 lb · 6,400 kg | +10% RT-135 |
| Maximum permissible mass declared | — | 23,149 lb · 10,500 kg | — |
| Wheelbase declared | 113.8 in · 2,891 mm | 100.8 in · 2,560 mm | +13% RT-135 |
| Length declared | 198.0 in · 5,030 mm | 175.3 in · 4,453 mm | +13% RT-135 |
| Width declared | 104.3 in · 2,650 mm | 96.5 in · 2,451 mm | +8% RT-135 |
| Ground clearance declared | 18.5 in · 470 mm | 20.9 in · 530 mm | +13% Vario 514 |
| Fuel tank declared | 399.4 qt · 378.0 L | 314.9 qt · 298 L | +27% RT-135 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Agco RT-135 sources
- Source: Traktorenlexikon, “AGCO RT 135”
- Source: Traktorenlexikon, “AGCO RT 100”
Fendt Vario 514 sources
- Source: Traktorenlexikon, “Fendt 514 Vario”
- Source: Traktorenlexikon, “Fendt 516 Vario”