10 material differences · fewer than 12
Tractor oneAgco RT-130 (Traktorenlexikon)2002–2004No measured PTO figureTractor twoFendt Vario 514from 2013No measured PTO figure
Which should you choose?
Read our verdict on the RT-130 and the Vario 514 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | RT-130 | Vario 514 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 133 hp | 133 hp | — |
| Engine declared | CUMMINS 6 BT 5.9-C 135 | Deutz TCD 4.1 L4-4V | differs |
| Displacement declared | 5.88 L | 4.04 L | +46% RT-130 |
| Maximum torque declared | 454 lb·ft · 616 N·m | 479 lb·ft · 649 N·m | +5% Vario 514 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 31.1 mph · 50 km/h | +25% Vario 514 |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 31.5 gpm · 119.3 L/min | — | — |
| Pressure declared | 3,336 psi · 230 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 14,879 lb · 6,749 kg | 14,110 lb · 6,400 kg | +5% RT-130 |
| Maximum permissible mass declared | — | 23,149 lb · 10,500 kg | — |
| Wheelbase declared | 117.5 in · 2,985 mm | 100.8 in · 2,560 mm | +17% RT-130 |
| Length declared | 198.0 in · 5,029 mm | 175.3 in · 4,453 mm | +13% RT-130 |
| Width declared | 117.7 in · 2,989 mm | 96.5 in · 2,451 mm | +22% RT-130 |
| Ground clearance declared | — | 20.9 in · 530 mm | — |
| Fuel tank declared | 432.2 qt · 409.0 L | 314.9 qt · 298 L | +37% RT-130 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Agco RT-130 (Traktorenlexikon) sources
- Source: Traktorenlexikon, “AGCO RT 130”
- Source: Traktorenlexikon, “AGCO RT 115”
Fendt Vario 514 sources
- Source: Traktorenlexikon, “Fendt 514 Vario”
- Source: Traktorenlexikon, “Fendt 516 Vario”