Agco RT-120 (Traktorenlexikon) or Massey Ferguson MF 5465 A?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the RT-120 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5465 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Massey Ferguson 5465A suits loader and hydraulic implement work better on this data: 12% (589 kg / 1,299 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Agco RT-120 (Traktorenlexikon) and Massey Ferguson MF 5465 A, with the call on each
QuestionRT-120MF 5465 ACall
Which puts more power through the PTO shaft?88.3 kW (118.4 hp)Traktorenlexikon, “AGCO RT 120”88.3 kW (118.4 hp)Traktorenlexikon, “Massey Ferguson MF 5465”Not comparableNot comparable on power at the PTO shaft: the RT-120 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5465 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the RT-120 and the MF 5465 A.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the RT-120 and the MF 5465 A.
Which pumps more oil for implements?127.4 L/min (33.7 gpm)Traktorenlexikon, “AGCO RT 120”—No figureNo call on hydraulic flow: no figure on record for the MF 5465 A.
Which lifts more on the three-point hitch?4,951 kg (10,915 lb)Traktorenlexikon, “AGCO RT 120”5,540.000 kg (12,214 lb)Traktorenlexikon, “Massey Ferguson MF 5465”AheadThe Massey Ferguson 5465A has 12% more lift (589 kg / 1,299 lb) than the Agco RT-120 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?6,905 kg (15,223 lb)Traktorenlexikon, “AGCO RT 120”5,425 kg (11,960 lb)Traktorenlexikon, “Massey Ferguson MF 5465”Ahead (a fact, not an advantage)The Agco RT-120 is 27% heavier (1,480 kg / 3,263 lb) than the Massey Ferguson 5465A (both unladen weight, as stated by the source).
Which may carry more ballast and load?—8,500 kg (18,739 lb)Traktorenlexikon, “Massey Ferguson MF 5465”No figureNo call on maximum permissible mass: no figure on record for the RT-120.
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “AGCO RT 120”16 forwardTraktorenlexikon, “Massey Ferguson MF 5465”DifferTransmissions differ in kind: the Agco RT-120 is stepless (CVT) and the Massey Ferguson 5465A has 16 forward gears — not called.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the RT-120 and the MF 5465 A.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “AGCO RT 120”40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 5465”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “AGCO RT 120”540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 5465”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “AGCO RT 120”—No figureNo call on PTO independence: not stated for the MF 5465 A.
Which drives on both axles?4WDTraktorenlexikon, “AGCO RT 120”; OECD test report 2235, 20054WDTraktorenlexikon, “Massey Ferguson MF 5465”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2004–20052003–2012EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson 5465A has 12% more lift (589 kg / 1,299 lb) than the Agco RT-120 (both lift at the hitch ends, as stated by the source).
  • The Agco RT-120 is 27% heavier (1,480 kg / 3,263 lb) than the Massey Ferguson 5465A (both unladen weight, as stated by the source).
  • Transmissions differ in kind: the Agco RT-120 is stepless (CVT) and the Massey Ferguson 5465A has 16 forward gears — not called.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the RT-120 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5465 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources