Agco RT-115 (Traktorenlexikon) or Deutz-Fahr Agrotron 6.15?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the RT-115 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 6.15 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Agco RT-115 suits loader and hydraulic implement work better on this data: 29% (24.1 L/min / 6.4 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Agco RT-115 (Traktorenlexikon) and Deutz-Fahr Agrotron 6.15, with the call on each
QuestionRT-115Agrotron 6.15Call
Which puts more power through the PTO shaft?86.8 kW (116.4 hp)Traktorenlexikon, “AGCO RT 115”85.8 kW (115.1 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 6.15”Not comparableNot comparable on power at the PTO shaft: the RT-115 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 6.15 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the RT-115 and the Agrotron 6.15.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the RT-115 and the Agrotron 6.15.
Which pumps more oil for implements?106.4 L/min (28.1 gpm)Traktorenlexikon, “AGCO RT 115”82.3 L/min (21.7 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 6.15”AheadThe Agco RT-115 has 29% more hydraulic flow (24.1 L/min / 6.4 gpm) than the Deutz-Fahr Agrotron 6.15 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?4,282 kg (9,440 lb)Traktorenlexikon, “AGCO RT 115”No figureNo call on three-point lift: no figure on record for the Agrotron 6.15.
Which is heavier, for traction?5,930 kg (13,073 lb)Traktorenlexikon, “AGCO RT 115”5,190 kg (11,442 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 6.15”Ahead (a fact, not an advantage)The Agco RT-115 is 14% heavier (740 kg / 1,631 lb) than the Deutz-Fahr Agrotron 6.15 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the RT-115 and the Agrotron 6.15.
Which has the wider choice of gears?32Traktorenlexikon, “AGCO RT 115”15 to 18Traktorenlexikon, “Deutz-Fahr Agrotron 6.15”AheadThe Agco RT-115 has 78% more forward gears (14 gears) than the Deutz-Fahr Agrotron 6.15 (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the RT-115 and the Agrotron 6.15.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “AGCO RT 115”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 6.15”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “AGCO RT 115”540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 6.15”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “AGCO RT 115”independentTraktorenlexikon, “Deutz-Fahr Agrotron 6.15”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “AGCO RT 115”4WDTraktorenlexikon, “Deutz-Fahr Agrotron 6.15”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2002–20041995–1997Ahead (a fact, not an advantage)The Agco RT-115 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Agco RT-115 has 29% more hydraulic flow (24.1 L/min / 6.4 gpm) than the Deutz-Fahr Agrotron 6.15 (both pump flow, as stated by the source).
  • The Agco RT-115 is 14% heavier (740 kg / 1,631 lb) than the Deutz-Fahr Agrotron 6.15 (both unladen weight, as stated by the source).
  • The Agco RT-115 has 78% more forward gears (14 gears) than the Deutz-Fahr Agrotron 6.15 (both forward gears, as stated by the source).
  • The Agco RT-115 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the RT-115 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 6.15 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources