Agco RT-100 A or Deutz-Fahr Agrotron 130?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the RT-100 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Agco RT-100 A suits loader and hydraulic implement work better on this data: 39% (32.1 L/min / 8.5 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | RT-100 A | Agrotron 130 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 94.1 kW (126.2 hp)Traktorenlexikon, “AGCO RT 100 A” | 94.2 kW (126.3 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 130” | Not comparableNot comparable on power at the PTO shaft: the RT-100 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the RT-100 A and the Agrotron 130. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the RT-100 A and the Agrotron 130. |
| Which pumps more oil for implements? | 115.1 L/min (30.4 gpm)Traktorenlexikon, “AGCO RT 100 A” | 83.0 L/min (21.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 130” | AheadThe Agco RT-100 A has 39% more hydraulic flow (32.1 L/min / 8.5 gpm) than the Deutz-Fahr Agrotron 130 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 9,240 kg (20,371 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 130” | No figureNo call on three-point lift: no figure on record for the RT-100 A. |
| Which is heavier, for traction? | 5,440 kg (11,993 lb)Traktorenlexikon, “AGCO RT 100 A” | 5,710 kg (12,588 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 130” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 9,000 kg (19,842 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 130” | No figureNo call on maximum permissible mass: no figure on record for the RT-100 A. |
| Which has the wider choice of gears? | Stepless (CVT)Traktorenlexikon, “AGCO RT 100 A” | 24 forwardTraktorenlexikon, “Deutz-Fahr Agrotron 130” | DifferTransmissions differ in kind: the Agco RT-100 A is stepless (CVT) and the Deutz-Fahr Agrotron 130 has 24 forward gears — not called. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the RT-100 A and the Agrotron 130. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “AGCO RT 100 A” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 130” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “AGCO RT 100 A” | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 130” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “AGCO RT 100 A” | independentTraktorenlexikon, “Deutz-Fahr Agrotron 130” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “AGCO RT 100 A” | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron 130” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2006–2007 | 2003–2004 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Agco RT-100 A has 39% more hydraulic flow (32.1 L/min / 8.5 gpm) than the Deutz-Fahr Agrotron 130 (both pump flow, as stated by the source).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Transmissions differ in kind: the Agco RT-100 A is stepless (CVT) and the Deutz-Fahr Agrotron 130 has 24 forward gears — not called.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the RT-100 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources