Agco LT-95 A vs John Deere 6430

9 material differences · fewer than 12

Tractor one

2008–2010

No measured PTO figure

Tractor two

2007–2012

No measured PTO figure

Which should you choose?

Read our verdict on the LT-95 A and the 6430 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Agco LT-95 A and John Deere 6430, field by field
Field	LT-95 A	6430	Gap
Engine
Engine power, claimed claimed	113.5 hp	113.5 hp	—
Engine declared	SISU-DIESEL 44 CTA	John Deere PowrTech 4.045 HL/V2-CR	differs
Displacement declared	4.40 L	4.53 L	—
Maximum torque declared	369 lb·ft · 500 N·m	326 lb·ft · 442 N·m	+13% LT-95 A
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated electro-hydraulic wet multi-disc clutch	Pedal-actuated hydraulic wet Perma-Clutch II multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	14.5 gpm · 54.9 L/min	—	—
Pressure declared	3,046 psi · 210 bar	3,408 psi · 235 bar	+12% 6430
Three-point lift at ends declared	—	11,199 lb · 5,080 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540E/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,069 lb · 5,021 kg	10,637 lb · 4,825 kg	—
Maximum permissible mass declared	—	18,078 lb · 8,200 kg	—
Wheelbase declared	108.4 in · 2,754 mm	94.5 in · 2,400 mm	+15% LT-95 A
Length declared	172.0 in · 4,369 mm	168.9 in · 4,289 mm	—
Width declared	79.3 in · 2,014 mm	91.2 in · 2,316 mm	+15% 6430
Height declared	110.3 in · 2,802 mm	108.0 in · 2,743 mm	—
Ground clearance declared	18.5 in · 470 mm	18.1 in · 460 mm	—
Fuel tank declared	152.0 qt · 143.8 L	174.4 qt · 165.0 L	+15% 6430

Source

Source