Agco LT-85 vs Case-Steyr M 9086 a

6 material differences · fewer than 12

Tractor one

2002–2004

No measured PTO figure

Tractor two

1995–2003

No measured PTO figure

Which should you choose?

Read our verdict on the LT-85 and the M 9086 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 6 fields identical or within 5%, which is not counted as material

Agco LT-85 and Case-Steyr M 9086 a, field by field
Field	LT-85	M 9086 a	Gap
Engine
Engine power, claimed claimed	86 hp	84.9 hp	—
Engine declared	CUMMINS B 3.9 T	Steyr-MWM WD 401.83	differs
Displacement declared	3.93 L	4.16 L	+6% M 9086 a
Maximum torque declared	274 lb·ft · 372 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch	—
Hydraulics & hitch
Pump flow declared	10.8 gpm · 40.9 L/min	—	—
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	3,351 lb · 1,520 kg	9,480 lb · 4,300 kg	+183% M 9086 a
Rear PTO speeds declared	540/1000 rpm	430/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,616 lb · 3,908 kg	8,708 lb · 3,950 kg	—
Maximum permissible mass declared	—	14,330 lb · 6,500 kg	—
Wheelbase declared	96.0 in · 2,438 mm	97.7 in · 2,481 mm	—
Length declared	165.0 in · 4,191 mm	165.9 in · 4,215 mm	—
Width declared	83.0 in · 2,108 mm	85.4 in · 2,170 mm	—
Height declared	103.0 in · 2,616 mm	100.4 in · 2,550 mm	—
Ground clearance declared	—	16.9 in · 430 mm	—
Turning radius, braked declared	—	14.1 ft · 4.30 m	—
Fuel tank declared	136.0 qt · 128.7 L	105.7 qt · 100.0 L	+29% LT-85

Source

Source