Agco LT-75 vs Case-IH CS-78 (A)

9 material differences · fewer than 12

Tractor one

Agco LT-75

2004–2006

No measured PTO figure

Tractor two

Case-IH CS-78 (A)

1995–2003

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (2004–2006; 1995–2003). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 4 fields identical or within 5%, which is not counted as material

Agco LT-75 and Case-IH CS-78 (A), field by field
Field	LT-75	CS-78 (A)	Gap
Engine
Engine power, claimed claimed	77.0 hp	77.0 hp	—
Engine declared	CUMMINS B 4.5 T	MWM WD 401.81	differs
Displacement declared	4.48 L	—	—
Maximum torque declared	240 lb·ft · 326 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Electrohydraulically operated wet multi-plate clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Open centre	differs
Pump flow declared	15.0 gpm · 56.8 L/min	13.3 gpm · 50.5 L/min	+12% LT-75
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	7,818 lb · 3,546 kg	—	—
Rear PTO speeds declared	540/1000 rpm	390/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,255 lb · 4,198 kg	7,430 lb · 3,370 kg	+25% LT-75
Maximum permissible mass declared	—	14,330 lb · 6,500 kg	—
Wheelbase declared	97.0 in · 2,464 mm	95.3 in · 2,420 mm	—
Length declared	165.5 in · 4,204 mm	158.5 in · 4,025 mm	—
Width declared	83.0 in · 2,108 mm	73.7 in · 1,873 mm	+13% LT-75
Height declared	110.0 in · 2,794 mm	104.7 in · 2,660 mm	—
Fuel tank declared	156.0 qt · 147.6 L	105.7 qt · 100.0 L	+48% LT-75

Agco LT-75 sources

Source

Source: Traktorenlexikon, “AGCO LT 75”
Source: Traktorenlexikon, “AGCO LT 75 A”

Case-IH CS-78 (A) sources

Source

Source: Traktorenlexikon, “Case-IH CS78”