Agco LT-70 vs Massey Ferguson MF 6110 (A)

8 material differences · fewer than 12

Tractor one

2002–2004

No measured PTO figure

Tractor two

1995–1997

No measured PTO figure

Which should you choose?

Read our verdict on the LT-70 and the MF 6110 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

Agco LT-70 and Massey Ferguson MF 6110 (A), field by field
Field	LT-70	MF 6110 (A)	Gap
Engine
Engine power, claimed claimed	70.0 hp	70.1 hp	—
Engine declared	CUMMINS B 3.9 T	Perkins A 4.236	differs
Displacement declared	3.93 L	3.87 L	—
Maximum torque declared	235 lb·ft · 319 N·m	203 lb·ft · 275 N·m	+16% LT-70
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch	Pedal operated dry air-cooled VALEO single disc clutch as driving clutch	differs
Hydraulics & hitch
Pump flow declared	10.6 gpm · 40.1 L/min	13.6 gpm · 51.5 L/min	+28% MF 6110 (A)
Pressure declared	3,046 psi · 210 bar	2,727 psi · 188 bar	+12% LT-70
Three-point lift at ends declared	3,347 lb · 1,518 kg	7,385 lb · 3,350 kg	+121% MF 6110 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,150 lb · 3,697 kg	7,926 lb · 3,595 kg	—
Wheelbase declared	96.0 in · 2,438 mm	93.3 in · 2,371 mm	—
Length declared	165.0 in · 4,191 mm	158.2 in · 4,019 mm	—
Width declared	83.0 in · 2,108 mm	72.8 in · 1,850 mm	+14% LT-70
Height declared	103.0 in · 2,616 mm	104.5 in · 2,654 mm	—
Ground clearance declared	—	14.1 in · 357 mm	—
Fuel tank declared	136.0 qt · 128.7 L	137.4 qt · 130.0 L	—

Source

Source