Agco LT-70 or Landini R-7880 (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the LT-70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-7880 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Landini R-7880 (DT) suits loader and hydraulic implement work better on this data: 104% (1,582 kg / 3,488 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Agco LT-70 and Landini R-7880 (DT), with the call on each
QuestionLT-70R-7880 (DT)Call
Which puts more power through the PTO shaft?52.2 kW (70.0 hp)Traktorenlexikon, “AGCO LT 70”52.2 kW (70.0 hp)Traktorenlexikon, “Landini 7880”Not comparableNot comparable on power at the PTO shaft: the LT-70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-7880 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the LT-70 and the R-7880 (DT).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the LT-70 and the R-7880 (DT).
Which pumps more oil for implements?40.1 L/min (10.6 gpm)Traktorenlexikon, “AGCO LT 70”36.7 L/min (9.7 gpm)Traktorenlexikon, “Landini 7880”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?1,518 kg (3,347 lb)Traktorenlexikon, “AGCO LT 70”3,100 kg (6,834 lb)Traktorenlexikon, “Landini 7880”AheadThe Landini R-7880 (DT) has 104% more lift (1,582 kg / 3,488 lb) than the Agco LT-70 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,697 kg (8,150 lb)Traktorenlexikon, “AGCO LT 70”3,340 kg (7,363 lb)Traktorenlexikon, “Landini 7880”Ahead (a fact, not an advantage)The Agco LT-70 is 11% heavier (357 kg / 787 lb) than the Landini R-7880 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the LT-70 and the R-7880 (DT).
Which has the wider choice of gears?12 to 24Traktorenlexikon, “AGCO LT 70”12 to 24Traktorenlexikon, “Landini 7880”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the LT-70 and the R-7880 (DT).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “AGCO LT 70”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Landini 7880”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “AGCO LT 70”540/540E/1000 rpmTraktorenlexikon, “Landini 7880”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “AGCO LT 70”—No figureNo call on PTO independence: not stated for the R-7880 (DT).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “AGCO LT 70”Two-wheel or four-wheel driveTraktorenlexikon, “Landini 7880”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2002–20041987–2000Ahead (a fact, not an advantage)The Agco LT-70 is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini R-7880 (DT) has 104% more lift (1,582 kg / 3,488 lb) than the Agco LT-70 (both lift at the hitch ends, as stated by the source).
  • The Agco LT-70 is 11% heavier (357 kg / 787 lb) than the Landini R-7880 (DT) (both unladen weight, as stated by the source).
  • The Agco LT-70 is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the LT-70 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-7880 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources