7 material differences · fewer than 12

Tractor oneAgco GT-752004–2007No measured PTO figureTractor twoHürlimann H-658 XA2000–2004No measured PTO figure

Which should you choose?

Read our verdict on the GT-75 and the H-658 XA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 9 fields identical or within 5%, which is not counted as material

Agco GT-75 and Hürlimann H-658 XA, field by field
Field	GT-75	H-658 XA	Gap
Engine
Engine power, claimed claimed	82 hp	82 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.4 AT 5	Hürlimann 1000.4 WT-4	differs
Displacement declared	4.00 L	4.00 L	—
Maximum torque declared	237 lb·ft · 321 N·m	226 lb·ft · 306 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch	Pedal operated dry SDF single disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	11.7 gpm · 44.3 L/min	11.8 gpm · 44.5 L/min	—
Pressure declared	3,118 psi · 215 bar	3,046 psi · 210 bar	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,038 lb · 2,739 kg	5,864 lb · 2,660 kg	—
Maximum permissible mass declared	—	11,023 lb · 5,000 kg	—
Wheelbase declared	88.0 in · 2,235 mm	86.2 in · 2,190 mm	—
Length declared	151.6 in · 3,851 mm	153.5 in · 3,900 mm	—
Width declared	76.7–88.9 in · 1,948–2,258 mm	80.7 in · 2,050 mm	differs
Height, over the cab declared	106.0 in · 2,692 mm	98.0 in · 2,490 mm	+8% GT-75
Ground clearance declared	17.5 in · 445 mm	15.0 in · 380 mm	+17% GT-75
Fuel tank declared	94.8 qt · 89.7 L	95.1 qt · 90.0 L	—

Source

Source