Agco GT-75 vs Deutz-Fahr Agroplus 87

6 material differences · fewer than 12

Tractor one

2004–2007

No measured PTO figure

Tractor two

2006–2009

No measured PTO figure

Which should you choose?

Read our verdict on the GT-75 and the Agroplus 87 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 9 fields identical or within 5%, which is not counted as material

Agco GT-75 and Deutz-Fahr Agroplus 87, field by field
Field	GT-75	Agroplus 87	Gap
Engine
Engine power, claimed claimed	82 hp	81.9 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.4 AT 5	SLH 1.000.4 WT	differs
Displacement declared	4.00 L	4.00 L	—
Maximum torque declared	237 lb·ft · 321 N·m	257 lb·ft · 348 N·m	+8% Agroplus 87
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Pedal-operated dry single-disc clutch	Mechanically operated, dry Borg & Beck single clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	11.7 gpm · 44.3 L/min	14.3 gpm · 54.0 L/min	+22% Agroplus 87
Pressure declared	3,118 psi · 215 bar	—	—
Three-point lift at ends declared	—	6,614 lb · 3,000 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	6,038 lb · 2,739 kg	5,952 lb · 2,700 kg	—
Maximum permissible mass declared	—	9,921 lb · 4,500 kg	—
Wheelbase declared	88.0 in · 2,235 mm	88.0 in · 2,235 mm	—
Length declared	151.6 in · 3,851 mm	140.2 in · 3,560 mm	+8% GT-75
Width declared	76.7 in · 1,948 mm	82.7 in · 2,100 mm	+8% Agroplus 87
Height declared	106.0 in · 2,692 mm	102.4 in · 2,600 mm	—
Ground clearance declared	17.5 in · 445 mm	17.5 in · 445 mm	—
Fuel tank declared	94.8 qt · 89.7 L	95.1 qt · 90 L	—

Source

Source