6 material differences · fewer than 12
Tractor oneAgco GT-652004–2007No measured PTO figureTractor twoLamborghini 675-75 (DT)2004–2007No measured PTO figure
Which should you choose?
Read our verdict on the GT-65 and the 675-75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | GT-65 | 675-75 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 70.0 hp | 70.0 hp | — |
| Engine declared | SAME-DEUTZ-FAHR 1000.4 A 5 | SAME 1000.4 W (Tier-II) | differs |
| Displacement declared | 4.00 L | 4.00 L | — |
| Maximum torque declared | 170 lb·ft · 230 N·m | 170 lb·ft · 231 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Pedal-operated dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 14.0 gpm · 53.0 L/min | 9.7 gpm · 36.8 L/min | +44% GT-65 |
| Pressure declared | 3,118 psi · 215 bar | 3,118 psi · 215 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,862 lb · 2,659 kg | 5,181 lb · 2,350 kg | +13% GT-65 |
| Wheelbase declared | 88.0 in · 2,235 mm | — | — |
| Length declared | 151.6 in · 3,851 mm | 154.3 in · 3,920 mm | — |
| Width declared | 76.7–88.9 in · 1,948–2,258 mm | 76.0–91.7 in · 1,930–2,330 mm | — |
| Ground clearance declared | 17.5 in · 445 mm | 15.7 in · 400 mm | +11% GT-65 |
| Turning radius, braked declared | 10.0 ft · 3.06 m | — | — |
| Fuel tank declared | 94.8 qt · 89.7 L | 64.5 qt · 61.0 L | +47% GT-65 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Agco GT-65 sources
- Source: Traktorenlexikon, “AGCO GT 65”
- Source: Traktorenlexikon, “SAME Dorado 70”
Lamborghini 675-75 (DT) sources
- Source: Traktorenlexikon, “Lamborghini 674-75 N”