7 material differences · fewer than 12
Tractor oneAgco GT-552004–2007No measured PTO figureTractor twoHürlimann XE 70 Tradition2005–2009No measured PTO figure
Which should you choose?
Read our verdict on the GT-55 and the XE 70 Tradition → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | GT-55 | XE 70 Tradition | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 66.1 hp | 66.1 hp | — |
| Engine declared | SAME-DEUTZ-FAHR 1000.3 WT 3-E | SAME-DEUTZ-FAHR 1000.3 WT (EURO-II) | differs |
| Displacement declared | 3.00 L | 3.00 L | — |
| Maximum torque declared | 184 lb·ft · 250 N·m | 192 lb·ft · 260 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | — | Pedal operated dry single plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 12.5 gpm · 47.3 L/min | — | — |
| Pressure declared | 3,118 psi · 215 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,509 lb · 2,499 kg | 5,181 lb · 2,350 kg | +6% GT-55 |
| Wheelbase declared | 82.9 in · 2,105 mm | 80.9 in · 2,055 mm | — |
| Length declared | 146.5 in · 3,720 mm | 128.7 in · 3,270 mm | +14% GT-55 |
| Width declared | 75.6–87.8 in · 1,920–2,230 mm | 70.1–85.8 in · 1,780–2,180 mm | differs |
| Ground clearance declared | 17.5 in · 445 mm | 15.0 in · 380 mm | +17% GT-55 |
| Turning radius, braked declared | 10.0 ft · 3.06 m | — | — |
| Fuel tank declared | 94.8 qt · 89.7 L | 52.8 qt · 50.0 L | +79% GT-55 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Agco GT-55 sources
- Source: Traktorenlexikon, “AGCO GT 55”
Hürlimann XE 70 Tradition sources
- Source: Traktorenlexikon, “Hürlimann XE 70 Tradition”