7 material differences · fewer than 12
Tractor oneAgco DT-275 B2009–2010No measured PTO figureTractor twoClaas Xerion 38002007–2013No measured PTO figure
Which should you choose?
Read our verdict on the DT-275 B and the Xerion 3800 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | DT-275 B | Xerion 3800 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 315.7 hp | 339 hp | +7% Xerion 3800 |
| Engine declared | SISU-DIESEL 84 CTA-4V | — | — |
| Displacement declared | 8.42 L | — | — |
| Maximum torque declared | — | 1,195 lb·ft · 1,620 N·m | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 31.1 mph · 50 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 27.9 gpm · 105.5 L/min | — | — |
| Pressure declared | 3,336 psi · 230 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 25,838 lb · 11,720 kg | 22,487 lb · 10,200 kg | +15% DT-275 B |
| Wheelbase declared | 122.2 in · 3,105 mm | 129.9 in · 3,300 mm | +6% Xerion 3800 |
| Length declared | 215.7 in · 5,479 mm | 261.0 in · 6,630 mm | +21% Xerion 3800 |
| Width declared | 79.3 in · 2,014 mm | 98.0 in · 2,490 mm | +24% Xerion 3800 |
| Ground clearance declared | 18.5 in · 470 mm | 18.5–22.4 in · 470–570 mm | differs |
| Turning radius, braked declared | 24.3 ft · 7.40 m | 19.7 ft · 6.00 m | +23% DT-275 B |
| Fuel tank declared | 623.4 qt · 590.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Agco DT-275 B sources
- Source: Traktorenlexikon, “AGCO DT 275 B”
- Source: Traktorenlexikon, “AGCO DT 205 B”
Claas Xerion 3800 sources
- Source: Traktorenlexikon, “Claas Xerion 3800”