10 material differences · fewer than 12

Tractor oneAgco DT-240 A2005–2008No measured PTO figureTractor twoCase-IH MX 2852002–2005No measured PTO figure

Which should you choose?

Read our verdict on the DT-240 A and the MX 285 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Agco DT-240 A and Case-IH MX 285, field by field
Field	DT-240 A	MX 285	Gap
Engine
Engine power, claimed claimed	286.0 hp	283.1 hp	—
Engine declared	SISU-DIESEL 84 ETA	CUMMINS 6 TAA-8304 (TIER-I)	differs
Displacement declared	8.42 L	8.27 L	—
Maximum torque declared	814 lb·ft · 1,103 N·m	946 lb·ft · 1,283 N·m	+16% MX 285
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Oil-immersed Case-IH multi-plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	36.9 gpm · 139.8 L/min	43.0 gpm · 162.7 L/min	+16% MX 285
Pressure declared	—	3,024 psi · 208.5 bar	—
Three-point lift, at the coupling points declared	14,648 lb · 6,644 kg	19,872 lb · 9,014 kg	+36% MX 285
Rear PTO speeds declared	540/1000/540E rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	20,371 lb · 9,240 kg	24,449 lb · 11,090 kg	+20% MX 285
Maximum permissible mass declared	30,865 lb · 14,000 kg	30,865 lb · 14,000 kg	—
Wheelbase declared	121.1 in · 3,075 mm	118.3 in · 3,005 mm	—
Length declared	209.4 in · 5,320 mm	227.6 in · 5,780 mm	+9% MX 285
Width declared	100.4 in · 2,550 mm	101.8 in · 2,585 mm	—
Height, over the cab declared	125.2 in · 3,180 mm	127.6 in · 3,240 mm	—
Ground clearance declared	19.7 in · 500 mm	13.8 in · 350 mm	+43% DT-240 A
Fuel tank declared	697.4 qt · 660.0 L	639.3 qt · 605.0 L	+9% DT-240 A

Source

Source