Agco DT-225 or Deutz-Fahr Agrotron 230?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the DT-225 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 230 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agrotron 230 suits loader and hydraulic implement work better on this data: 17% (1,560 kg / 3,439 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Agco DT-225 and Deutz-Fahr Agrotron 230, with the call on each
QuestionDT-225Agrotron 230Call
Which puts more power through the PTO shaft?167.7 kW (224.9 hp)Traktorenlexikon, “AGCO DT 225”169.3 kW (227.0 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 230”Not comparableNot comparable on power at the PTO shaft: the DT-225 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 230 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the DT-225 and the Agrotron 230.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the DT-225 and the Agrotron 230.
Which pumps more oil for implements?113.2 L/min (29.9 gpm)Traktorenlexikon, “AGCO DT 225”120.3 L/min (31.8 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 230”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?8,940 kg (19,709 lb)Traktorenlexikon, “AGCO DT 225”10,500 kg (23,149 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 230”AheadThe Deutz-Fahr Agrotron 230 has 17% more lift (1,560 kg / 3,439 lb) than the Agco DT-225 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?8,956 kg (19,745 lb)Traktorenlexikon, “AGCO DT 225”8,350 kg (18,409 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 230”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?14,000 kg (30,865 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 230”No figureNo call on maximum permissible mass: no figure on record for the DT-225.
Which has the wider choice of gears?18Traktorenlexikon, “AGCO DT 225”40Traktorenlexikon, “Deutz-Fahr Agrotron 230”AheadThe Deutz-Fahr Agrotron 230 has 122% more forward gears (22 gears) than the Agco DT-225 (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the DT-225 and the Agrotron 230.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “AGCO DT 225”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 230”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “AGCO DT 225”1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 230”EvenEven on PTO speeds: the same speeds (1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 230”No figureNo call on PTO independence: not stated for the DT-225.
Which drives on both axles?4WDTraktorenlexikon, “AGCO DT 225”4WDTraktorenlexikon, “Deutz-Fahr Agrotron 230”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2002–20041998–2001EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 230 has 17% more lift (1,560 kg / 3,439 lb) than the Agco DT-225 (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr Agrotron 230 has 122% more forward gears (22 gears) than the Agco DT-225 (both forward gears, as stated by the source).
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the DT-225 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 230 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources