Agco DT-225 or Case-IH 7140 Magnum?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the DT-225 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 7140 Magnum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Agco DT-225 suits loader and hydraulic implement work better on this data: 43% (2,689 kg / 5,928 lb) more three-point lift.
- The Agco DT-225 suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | DT-225 | 7140 Magnum | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 167.7 kW (224.9 hp)Traktorenlexikon, “AGCO DT 225” | 169.2 kW (226.9 hp)Traktorenlexikon, “Case-IH 7140” | Not comparableNot comparable on power at the PTO shaft: the DT-225 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 7140 Magnum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the DT-225 and the 7140 Magnum. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the DT-225 and the 7140 Magnum. |
| Which pumps more oil for implements? | 113.2 L/min (29.9 gpm)Traktorenlexikon, “AGCO DT 225” | 107.2 L/min (28.3 gpm)Traktorenlexikon, “Case-IH 7140” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 8,940 kg (19,709 lb)Traktorenlexikon, “AGCO DT 225” | 6,251 kg (13,781 lb)Traktorenlexikon, “Case-IH 7140” | AheadThe Agco DT-225 has 43% more lift (2,689 kg / 5,928 lb) than the Case-IH 7140 Magnum (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 8,956 kg (19,745 lb)Traktorenlexikon, “AGCO DT 225” | 7,967 kg (17,564 lb)Traktorenlexikon, “Case-IH 7140” | Ahead (a fact, not an advantage)The Agco DT-225 is 12% heavier (989 kg / 2,180 lb) than the Case-IH 7140 Magnum (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 11,575 kg (25,519 lb)Traktorenlexikon, “Case-IH 7140” | No figureNo call on maximum permissible mass: no figure on record for the DT-225. |
| Which has the wider choice of gears? | 18Traktorenlexikon, “AGCO DT 225” | 18 to 24Traktorenlexikon, “Case-IH 7140” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the DT-225 and the 7140 Magnum. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “AGCO DT 225” | 30 km/h (18.6 mph)Traktorenlexikon, “Case-IH 7140” | AheadThe Agco DT-225 has 33% more top speed (10.0 km/h / 6.2 mph) than the Case-IH 7140 Magnum (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “AGCO DT 225” | 1000 rpmTraktorenlexikon, “Case-IH 7140” | EvenEven on PTO speeds: the same speeds (1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Case-IH 7140” | No figureNo call on PTO independence: not stated for the DT-225. |
| Which drives on both axles? | 4WDTraktorenlexikon, “AGCO DT 225” | 4WDTraktorenlexikon, “Case-IH 7140” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2002–2004 | 1988–1993 | Ahead (a fact, not an advantage)The Agco DT-225 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Agco DT-225 has 43% more lift (2,689 kg / 5,928 lb) than the Case-IH 7140 Magnum (both lift at the hitch ends, as stated by the source).
- The Agco DT-225 is 12% heavier (989 kg / 2,180 lb) than the Case-IH 7140 Magnum (both unladen weight, as stated by the source).
- The Agco DT-225 has 33% more top speed (10.0 km/h / 6.2 mph) than the Case-IH 7140 Magnum (both top speed forward, as stated by the source).
- The Agco DT-225 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the DT-225 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 7140 Magnum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources