Agco DT-225 B or Steyr-Case 9270 a?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the DT-225 B has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9270 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | DT-225 B | 9270 a | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 194.9 kW (261.4 hp)Traktorenlexikon, “AGCO DT 225 B” | 192.1 kW (257.6 hp)Traktorenlexikon, “Steyr 9270 a” | Not comparableNot comparable on power at the PTO shaft: the DT-225 B has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9270 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the DT-225 B and the 9270 a. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the DT-225 B and the 9270 a. |
| Which pumps more oil for implements? | 105.5 L/min (27.9 gpm)Traktorenlexikon, “AGCO DT 225 B” | 112.4 L/min (29.7 gpm)Traktorenlexikon, “Steyr 9270 a” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 11,156 kg (24,595 lb)Traktorenlexikon, “AGCO DT 225 B” | 6,600 kg (14,551 lb)Traktorenlexikon, “Steyr 9270 a” | Not comparableNot comparable on three-point lift: the DT-225 B: lift at the hitch ends, as stated by the source (Traktorenlexikon, “AGCO DT 225 B”); the 9270 a: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Steyr 9270 a”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 11,720 kg (25,838 lb)Traktorenlexikon, “AGCO DT 225 B” | 8,318 kg (18,338 lb)Traktorenlexikon, “Steyr 9270 a” | Ahead (a fact, not an advantage)The Agco DT-225B is 41% heavier (3,402 kg / 7,500 lb) than the Steyr-Case 9270a (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the DT-225 B and the 9270 a. |
| Which has the wider choice of gears? | Stepless (CVT)Traktorenlexikon, “AGCO DT 225 B” | 24 forwardTraktorenlexikon, “Steyr 9270 a” | DifferTransmissions differ in kind: the Agco DT-225B is stepless (CVT) and the Steyr-Case 9270a has 24 forward gears — not called. |
| Which offers a creeper range? | — | YesTraktorenlexikon, “Steyr 9270 a” | No figureNo call on a creeper range: not stated for the DT-225 B. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “AGCO DT 225 B” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 9270 a” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “AGCO DT 225 B” | 540/1000 rpmTraktorenlexikon, “Steyr 9270 a” | AheadThe Steyr-Case 9270a offers 540 rpm at the PTO, which the Agco DT-225B does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “AGCO DT 225 B” | — | No figureNo call on PTO independence: not stated for the 9270 a. |
| Which drives on both axles? | 4WDTraktorenlexikon, “AGCO DT 225 B” | 4WDTraktorenlexikon, “Steyr 9270 a” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2009–2010 | 1997–1999 | Ahead (a fact, not an advantage)The Agco DT-225B is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Agco DT-225B is 41% heavier (3,402 kg / 7,500 lb) than the Steyr-Case 9270a (both unladen weight, as stated by the source).
- The Steyr-Case 9270a offers 540 rpm at the PTO, which the Agco DT-225B does not (as stated by the sources).
- The Agco DT-225B is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Transmissions differ in kind: the Agco DT-225B is stepless (CVT) and the Steyr-Case 9270a has 24 forward gears — not called.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the DT-225 B has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9270 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the DT-225 B: lift at the hitch ends, as stated by the source (Traktorenlexikon, “AGCO DT 225 B”); the 9270 a: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Steyr 9270 a”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources