Agco DT-220 A or New Holland TG 255 (Traktorenlexikon)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the DT-220 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TG 255 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Agco DT-220A suits loader and hydraulic implement work better on this data: 55% (2,354 kg / 5,190 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Agco DT-220 A and New Holland TG 255 (Traktorenlexikon), with the call on each
QuestionDT-220 ATG 255Call
Which puts more power through the PTO shaft?191.2 kW (256.4 hp)Traktorenlexikon, “AGCO DT 220 A”189.8 kW (254.5 hp)Traktorenlexikon, “New Holland TG255”Not comparableNot comparable on power at the PTO shaft: the DT-220 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TG 255 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the DT-220 A and the TG 255.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the DT-220 A and the TG 255.
Which pumps more oil for implements?139.8 L/min (36.9 gpm)Traktorenlexikon, “AGCO DT 220 A”146.5 L/min (38.7 gpm)Traktorenlexikon, “New Holland TG255”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?6,644 kg (14,648 lb)Traktorenlexikon, “AGCO DT 220 A”4,290 kg (9,458 lb)Traktorenlexikon, “New Holland TG255”AheadThe Agco DT-220A has 55% more lift (2,354 kg / 5,190 lb) than the New Holland TG 255 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?9,240 kg (20,371 lb)Traktorenlexikon, “AGCO DT 220 A”9,643 kg (21,259 lb)Traktorenlexikon, “New Holland TG255”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?14,000 kg (30,865 lb)Traktorenlexikon, “AGCO DT 220 A”14,000 kg (30,865 lb)Traktorenlexikon, “New Holland TG255”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “AGCO DT 220 A”18 to 24 forwardTraktorenlexikon, “New Holland TG255”DifferTransmissions differ in kind: the Agco DT-220A is stepless (CVT) and the New Holland TG 255 has 18 to 24 forward gears — not called.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the DT-220 A and the TG 255.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “AGCO DT 220 A”40 km/h (24.9 mph)Traktorenlexikon, “New Holland TG255”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000/540E rpmTraktorenlexikon, “AGCO DT 220 A”1000 rpmTraktorenlexikon, “New Holland TG255”AheadThe Agco DT-220A offers 540 rpm at the PTO, which the New Holland TG 255 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “AGCO DT 220 A”independentTraktorenlexikon, “New Holland TG255”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “AGCO DT 220 A”4WDTraktorenlexikon, “New Holland TG255”; OECD test report 2187, 2004EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2005–20082002–2005EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Agco DT-220A has 55% more lift (2,354 kg / 5,190 lb) than the New Holland TG 255 (both lift at the hitch ends, as stated by the source).
  • The Agco DT-220A offers 540 rpm at the PTO, which the New Holland TG 255 does not (as stated by the sources).
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Transmissions differ in kind: the Agco DT-220A is stepless (CVT) and the New Holland TG 255 has 18 to 24 forward gears — not called.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the DT-220 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TG 255 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources