2 material differences · fewer than 12
Tractor oneAgco DT-220 A2005–2008No measured PTO figureTractor twoMassey Ferguson MF 84702004–2008No measured PTO figure
Which should you choose?
Read our verdict on the DT-220 A and the MF 8470 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
2 material differences · 14 fields identical or within 5%, which is not counted as material
| Field | DT-220 A | MF 8470 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 256.4 hp | 256.7 hp | — |
| Engine declared | SISU-DIESEL 84 ETA | SISU-Power 84.329 ETA | differs |
| Displacement declared | 8.42 L | 8.42 L | — |
| Maximum torque declared | 763 lb·ft · 1,035 N·m | 763 lb·ft · 1,035 N·m | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9–31.1 mph · 40–50 km/h | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 36.9 gpm · 139.8 L/min | 39.6 gpm · 150.0 L/min | +7% MF 8470 |
| Pressure declared | — | 2,176 psi · 150 bar | — |
| Rear PTO speeds declared | 540/1000/540E rpm | 540/1000/540E rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 20,371 lb · 9,240 kg | 20,371 lb · 9,240 kg | — |
| Maximum permissible mass declared | 30,865 lb · 14,000 kg | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 121.1 in · 3,075 mm | 121.1 in · 3,075 mm | — |
| Length declared | 209.4 in · 5,320 mm | 209.4 in · 5,320 mm | — |
| Width declared | 100.4 in · 2,550 mm | 100.4 in · 2,550 mm | — |
| Height, over the cab declared | 125.2 in · 3,180 mm | 125.2 in · 3,180 mm | — |
| Ground clearance declared | 19.7 in · 500 mm | 19.7 in · 500 mm | — |
| Fuel tank declared | 697.4 qt · 660.0 L | 697.4 qt · 660.0 L | — |
Agco DT-220 A sources
Source
- Source: Traktorenlexikon, “AGCO DT 220 A”
Massey Ferguson MF 8470 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 8470”