Agco DT-220 A vs Deutz-Fahr Agrotron 260 MK3

8 material differences · fewer than 12

Tractor one

2005–2008

No measured PTO figure

Tractor two

2001–2003

No measured PTO figure

Which should you choose?

Read our verdict on the DT-220 A and the Agrotron 260 MK3 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 9 fields identical or within 5%, which is not counted as material

Agco DT-220 A and Deutz-Fahr Agrotron 260 MK3, field by field
Field	DT-220 A	Agrotron 260 MK3	Gap
Engine
Engine power, claimed claimed	256.4 hp	256.7 hp	—
Engine declared	SISU-DIESEL 84 ETA	Deutz BF6M 1013 FC	differs
Displacement declared	8.42 L	7.15 L	+18% DT-220 A
Maximum torque declared	763 lb·ft · 1,035 N·m	774 lb·ft · 1,050 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9–31.1 mph · 40–50 km/h	—
Clutch declared	—	Hydraulically operated wet ZF multi-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	36.9 gpm · 139.8 L/min	31.8 gpm · 120.3 L/min	+16% DT-220 A
Pressure declared	—	2,770 psi · 191 bar	—
Three-point lift at ends declared	14,648 lb · 6,644 kg	23,149 lb · 10,500 kg	+58% Agrotron 260 MK3
Rear PTO speeds declared	540/1000/540E rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	20,371 lb · 9,240 kg	18,409 lb · 8,350 kg	+11% DT-220 A
Maximum permissible mass declared	30,865 lb · 14,000 kg	30,865 lb · 14,000 kg	—
Wheelbase declared	121.1 in · 3,075 mm	121.6 in · 3,089 mm	—
Length declared	209.4 in · 5,320 mm	211.0 in · 5,360 mm	—
Width declared	100.4 in · 2,550 mm	105.1 in · 2,670 mm	—
Height declared	125.2 in · 3,180 mm	127.0 in · 3,225 mm	—
Ground clearance declared	19.7 in · 500 mm	21.3 in · 540 mm	+8% Agrotron 260 MK3
Fuel tank declared	697.4 qt · 660.0 L	581.2 qt · 550 L	+20% DT-220 A

Source

Source