Agco DT-205 B or Massey Ferguson MF 9240?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the DT-205 B has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 9240 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Agco DT-205B suits loader and hydraulic implement work better on this data: 62% (4,287 kg / 9,451 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | DT-205 B | MF 9240 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 176.5 kW (236.7 hp)Traktorenlexikon, “AGCO DT 205 B” | 176.6 kW (236.8 hp)Traktorenlexikon, “Massey Ferguson MF 9240” | Not comparableNot comparable on power at the PTO shaft: the DT-205 B has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 9240 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the DT-205 B and the MF 9240. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the DT-205 B and the MF 9240. |
| Which pumps more oil for implements? | 95.6 L/min (25.3 gpm)Traktorenlexikon, “AGCO DT 205 B” | — | No figureNo call on hydraulic flow: no figure on record for the MF 9240. |
| Which lifts more on the three-point hitch? | 11,156 kg (24,595 lb)Traktorenlexikon, “AGCO DT 205 B” | 6,869 kg (15,144 lb)Traktorenlexikon, “Massey Ferguson MF 9240” | AheadThe Agco DT-205B has 62% more lift (4,287 kg / 9,451 lb) than the Massey Ferguson 9240 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 11,720 kg (25,838 lb)Traktorenlexikon, “AGCO DT 205 B” | 9,014 kg (19,872 lb)Traktorenlexikon, “Massey Ferguson MF 9240” | Ahead (a fact, not an advantage)The Agco DT-205B is 30% heavier (2,706 kg / 5,966 lb) than the Massey Ferguson 9240 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 12,000 kg (26,455 lb)Traktorenlexikon, “Massey Ferguson MF 9240” | No figureNo call on maximum permissible mass: no figure on record for the DT-205 B. |
| Which has the wider choice of gears? | Stepless (CVT)Traktorenlexikon, “AGCO DT 205 B” | 18 forwardTraktorenlexikon, “Massey Ferguson MF 9240” | DifferTransmissions differ in kind: the Agco DT-205B is stepless (CVT) and the Massey Ferguson 9240 has 18 forward gears — not called. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the DT-205 B and the MF 9240. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “AGCO DT 205 B” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 9240” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “AGCO DT 205 B” | 1000 rpmTraktorenlexikon, “Massey Ferguson MF 9240” | EvenEven on PTO speeds: the same speeds (1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “AGCO DT 205 B” | independentTraktorenlexikon, “Massey Ferguson MF 9240” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “AGCO DT 205 B” | 4WDTraktorenlexikon, “Massey Ferguson MF 9240” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2009–2010 | 1994–1998 | Ahead (a fact, not an advantage)The Agco DT-205B is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Agco DT-205B has 62% more lift (4,287 kg / 9,451 lb) than the Massey Ferguson 9240 (both lift at the hitch ends, as stated by the source).
- The Agco DT-205B is 30% heavier (2,706 kg / 5,966 lb) than the Massey Ferguson 9240 (both unladen weight, as stated by the source).
- The Agco DT-205B is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
- Transmissions differ in kind: the Agco DT-205B is stepless (CVT) and the Massey Ferguson 9240 has 18 forward gears — not called.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the DT-205 B has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 9240 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources