11 material differences · fewer than 12

Tractor oneAgco DT-200 A2005–2008No measured PTO figureTractor twoCase-IH MX 2302002–2005No measured PTO figure

Which should you choose?

Read our verdict on the DT-200 A and the MX 230 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Agco DT-200 A and Case-IH MX 230, field by field
Field	DT-200 A	MX 230	Gap
Engine
Engine power, claimed claimed	231.7 hp	230.8 hp	—
Engine declared	SISU-DIESEL 74 ETA	CUMMINS 6 TAA-830 (Tier-I)	differs
Displacement declared	7.37 L	8.27 L	+12% MX 230
Maximum torque declared	682 lb·ft · 924 N·m	778 lb·ft · 1,055 N·m	+14% MX 230
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Oil-immersed Case-IH multi-plate clutch with nine plates	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	37.4 gpm · 141.5 L/min	38.6 gpm · 146.1 L/min	—
Pressure declared	3,336 psi · 230 bar	3,024 psi · 208.5 bar	+10% DT-200 A
Three-point lift, at the coupling points declared	14,648 lb · 6,644 kg	17,939 lb · 8,137 kg	+22% MX 230
Rear PTO speeds declared	540/1000/540E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	19,136 lb · 8,680 kg	20,111 lb · 9,122 kg	—
Maximum permissible mass declared	30,865 lb · 14,000 kg	30,865 lb · 14,000 kg	—
Wheelbase declared	121.1 in · 3,075 mm	118.3 in · 3,005 mm	—
Length declared	206.3 in · 5,240 mm	224.0 in · 5,690 mm	+9% MX 230
Width declared	100.4 in · 2,550 mm	120.0–150.0 in · 3,048–3,810 mm	differs
Height, over the cab declared	121.7 in · 3,090 mm	124.0 in · 3,150 mm	—
Ground clearance declared	19.7 in · 500 mm	13.8 in · 350 mm	+43% DT-200 A
Fuel tank declared	697.4 qt · 660.0 L	519.9 qt · 492.0 L	+34% DT-200 A

Source

Source