12 material differences

Tractor oneAgco DT-200 A2005–2008No measured PTO figureTractor twoCase-IH 92401990–1994No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (47%); they were not built in overlapping years (2005–2008; 1990–1994). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

12 material differences · 3 fields identical or within 5%, which is not counted as material

Agco DT-200 A and Case-IH 9240, field by field
Field	DT-200 A	9240	Gap
Engine
Engine power, claimed claimed	231.7 hp	231.7 hp	—
Engine declared	SISU-DIESEL 74 ETA	CUMMINS 6 TA-830	differs
Displacement declared	7.37 L	8.27 L	+12% 9240
Maximum torque declared	682 lb·ft · 924 N·m	603 lb·ft · 818 N·m	+13% DT-200 A
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	F.T.K. multi-plate clutch running in oil bath	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	37.4 gpm · 141.5 L/min	29.1 gpm · 110.2 L/min	+28% DT-200 A
Pressure declared	3,336 psi · 230 bar	3,002 psi · 207 bar	+11% DT-200 A
Rear PTO speeds declared	540/1000/540E rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	19,136 lb · 8,680 kg	28,215 lb · 12,798 kg	+47% 9240
Maximum permissible mass declared	30,865 lb · 14,000 kg	—	—
Wheelbase declared	121.1 in · 3,075 mm	124.0 in · 3,150 mm	—
Length declared	206.3 in · 5,240 mm	256.6 in · 6,517 mm	+24% 9240
Width declared	100.4 in · 2,550 mm	104.8–162.0 in · 2,661–4,115 mm	differs
Height, over the cab declared	121.7 in · 3,090 mm	125.9 in · 3,198 mm	—
Ground clearance declared	19.7 in · 500 mm	13.4 in · 340 mm	+47% DT-200 A
Fuel tank declared	697.4 qt · 660.0 L	799.9 qt · 757.0 L	+15% 9240

Agco DT-200 A sources

Source

Source: Traktorenlexikon, “AGCO DT 200 A”
Source: Traktorenlexikon, “AGCO DT 180 A”

Case-IH 9240 sources