Agco DT-180 vs Case-IH Puma 180

12 material differences

Tractor one

2002–2004

No measured PTO figure

Tractor two

2007–2011

No measured PTO figure

Which should you choose?

Read our verdict on the DT-180 and the Puma 180 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Agco DT-180 and Case-IH Puma 180, field by field
Field	DT-180	Puma 180	Gap
Engine
Engine power, claimed claimed	179.6 hp	179.6 hp	—
Engine declared	CUMMINS CTA-8.3	IVECO-NEF 667 TA	differs
Displacement declared	8.27 L	6.73 L	+23% DT-180
Maximum torque declared	633 lb·ft · 858 N·m	592 lb·ft · 802 N·m	+7% DT-180
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal-operated wet VALEO multi-plate clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	30.3 gpm · 114.7 L/min	35.9 gpm · 135.8 L/min	+18% Puma 180
Pressure declared	3,046 psi · 210 bar	2,756 psi · 190 bar	+11% DT-180
Three-point lift at ends declared	19,709 lb · 8,940 kg	—	—
Rear PTO speeds declared	1000 rpm	540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	19,484 lb · 8,838 kg	18,034 lb · 8,180 kg	+8% DT-180
Maximum permissible mass declared	—	26,455 lb · 12,000 kg	—
Wheelbase declared	121.0 in · 3,073 mm	113.5 in · 2,884 mm	+7% DT-180
Length declared	203.0 in · 5,156 mm	193.5 in · 4,916 mm	—
Width declared	98.2 in · 2,494 mm	85.2 in · 2,165 mm	+15% DT-180
Height declared	120.0 in · 3,048 mm	119.7 in · 3,040 mm	—
Ground clearance declared	18.0 in · 457 mm	15.7 in · 400 mm	+14% DT-180
Fuel tank declared	479.7 qt · 454.0 L	433.2 qt · 410.0 L	+11% DT-180

Source

Source