Agco DT-180 A vs New Holland T 8010

10 material differences · fewer than 12

Tractor one

2005–2008

No measured PTO figure

Tractor two

2006–2011

No measured PTO figure

Which should you choose?

Read our verdict on the DT-180 A and the T 8010 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Agco DT-180 A and New Holland T 8010, field by field
Field	DT-180 A	T 8010	Gap
Engine
Engine power, claimed claimed	212.0 hp	217.9 hp	—
Engine declared	SISU-DIESEL 74 ETA	CUMMINS 6 TAA-8304 (TIER-III)	differs
Displacement declared	7.37 L	8.27 L	+12% T 8010
Maximum torque declared	645 lb·ft · 875 N·m	673 lb·ft · 913 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9–31.1 mph · 40–50 km/h	—
Clutch declared	Electro-hydraulically operated wet multi-disc PTO clutch	—	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	37.4 gpm · 141.5 L/min	44.0 gpm · 166.6 L/min	+18% T 8010
Pressure declared	2,176 psi · 150 bar	3,336 psi · 230 bar	+53% T 8010
Three-point lift at ends declared	14,648 lb · 6,644 kg	17,046 lb · 7,732 kg	+16% T 8010
Rear PTO speeds declared	540/1000/540E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	19,908 lb · 9,030 kg	21,325 lb · 9,673 kg	+7% T 8010
Maximum permissible mass declared	30,865 lb · 14,000 kg	30,865 lb · 14,000 kg	—
Wheelbase declared	121.1 in · 3,075 mm	121.2 in · 3,078 mm	—
Length declared	206.3 in · 5,240 mm	229.5 in · 5,829 mm	+11% T 8010
Width declared	100.4 in · 2,550 mm	98.0 in · 2,490 mm	—
Height declared	122.0 in · 3,100 mm	131.1 in · 3,331 mm	+7% T 8010
Ground clearance declared	18.5 in · 470 mm	14.6 in · 372 mm	+26% DT-180 A
Fuel tank declared	697.4 qt · 660.0 L	720.7 qt · 682.0 L	—

Source

Source