Agco DT-160 vs Deutz-Fahr AgroStar 6.71

10 material differences · fewer than 12

Tractor one

2002–2004

No measured PTO figure

Tractor two

1993–1997

No measured PTO figure

Which should you choose?

Read our verdict on the DT-160 and the AgroStar 6.71 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Agco DT-160 and Deutz-Fahr AgroStar 6.71, field by field
Field	DT-160	AgroStar 6.71	Gap
Engine
Engine power, claimed claimed	159.8 hp	158 hp	—
Engine declared	CUMMINS C-8.3 T	MWM TD 226 B-6	differs
Displacement declared	8.27 L	6.23 L	+33% DT-160
Maximum torque declared	538 lb·ft · 729 N·m	471 lb·ft · 639 N·m	+14% DT-160
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Pedal operated wet VALEO multi-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	30.8 gpm · 116.6 L/min	21.8 gpm · 82.7 L/min	+41% DT-160
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	16,094 lb · 7,300 kg	17,637 lb · 8,000 kg	+10% AgroStar 6.71
Rear PTO speeds declared	540/1000 rpm	540/1000/750 rpm	differs
Weight & dimensions
Unladen weight declared	19,010 lb · 8,623 kg	14,991 lb · 6,800 kg	+27% DT-160
Maximum permissible mass declared	—	22,046 lb · 10,000 kg	—
Wheelbase declared	121.0 in · 3,073 mm	113.1 in · 2,872 mm	+7% DT-160
Length declared	203.0 in · 5,156 mm	199.2 in · 5,060 mm	—
Width declared	98.2 in · 2,494 mm	97.2 in · 2,470 mm	—
Height declared	120.0 in · 3,048 mm	120.5 in · 3,060 mm	—
Ground clearance declared	18.0 in · 457 mm	22.8 in · 580 mm	+27% AgroStar 6.71
Fuel tank declared	479.7 qt · 454.0 L	401.5 qt · 380 L	+19% DT-160

Source

Source