AGCO-ALLIS 9815 vs Fendt Favorit 622 LS

6 material differences · fewer than 12

Tractor one

1994–1998

No measured PTO figure

Tractor two

1979–1982

No measured PTO figure

Which should you choose?

Read our verdict on the 9815 and the Favorit 622 LS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9815 and Fendt Favorit 622 LS, field by field
Field	9815	Favorit 622 LS	Gap
Engine
Engine power, claimed claimed	215.0 hp	208 hp	—
Engine declared	DETROIT-DIESEL DT-530	—	—
Displacement declared	8.71 L	—	—
Maximum torque declared	729 lb·ft · 989 N·m	611 lb·ft · 828 N·m	+19% 9815
Transmission
Top speed declared	24.9 mph · 40 km/h	24.2–24.5 mph · 39.0–39.5 km/h	—
Clutch declared	—	Driving clutch, separate PTO clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	27.8 gpm · 105.2 L/min	—	—
Pressure declared	2,944 psi · 203 bar	—	—
Three-point lift at ends declared	13,113 lb · 5,948 kg	—	—
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	19,608 lb · 8,894 kg	21,109 lb · 9,575 kg	+8% Favorit 622 LS
Maximum permissible mass declared	—	25,441 lb · 11,540 kg	—
Wheelbase declared	115.0 in · 2,921 mm	108.3 in · 2,750 mm	+6% 9815
Length declared	200.0 in · 5,080 mm	220.5 in · 5,600 mm	+10% Favorit 622 LS
Width declared	98.0 in · 2,489 mm	96.5 in · 2,450 mm	—
Height declared	121.0 in · 3,073 mm	121.3 in · 3,080 mm	—
Ground clearance declared	22.5 in · 572 mm	19.7 in · 500 mm	+14% 9815
Turning radius, braked declared	14.8 ft · 4.50 m	19.4 ft · 5.90 m	+31% Favorit 622 LS
Fuel tank declared	363.5 qt · 344.0 L	369.8 qt · 350 L	—

Source

Source