AGCO-ALLIS 9815 vs Agco DT-180 A

11 material differences · fewer than 12

Tractor one

1994–1998

No measured PTO figure

Tractor two

2005–2008

No measured PTO figure

Which should you choose?

Read our verdict on the 9815 and the DT-180 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9815 and Agco DT-180 A, field by field
Field	9815	DT-180 A	Gap
Engine
Engine power, claimed claimed	215.0 hp	212.0 hp	—
Engine declared	DETROIT-DIESEL DT-530	SISU-DIESEL 74 ETA	differs
Displacement declared	8.71 L	7.37 L	+18% 9815
Maximum torque declared	729 lb·ft · 989 N·m	645 lb·ft · 875 N·m	+13% 9815
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	—	Electro-hydraulically operated wet multi-disc PTO clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	27.8 gpm · 105.2 L/min	37.4 gpm · 141.5 L/min	+35% DT-180 A
Pressure declared	2,944 psi · 203 bar	2,176 psi · 150 bar	+35% 9815
Three-point lift at ends declared	13,113 lb · 5,948 kg	14,648 lb · 6,644 kg	+12% DT-180 A
Rear PTO speeds declared	1000 rpm	540/1000/540E rpm	differs
Weight & dimensions
Unladen weight declared	19,608 lb · 8,894 kg	19,908 lb · 9,030 kg	—
Maximum permissible mass declared	—	30,865 lb · 14,000 kg	—
Wheelbase declared	115.0 in · 2,921 mm	121.1 in · 3,075 mm	+5% DT-180 A
Length declared	200.0 in · 5,080 mm	206.3 in · 5,240 mm	—
Width declared	98.0 in · 2,489 mm	100.4 in · 2,550 mm	—
Height declared	121.0 in · 3,073 mm	122.0 in · 3,100 mm	—
Ground clearance declared	22.5 in · 572 mm	18.5 in · 470 mm	+22% 9815
Turning radius, braked declared	14.8 ft · 4.50 m	—	—
Fuel tank declared	363.5 qt · 344.0 L	697.4 qt · 660.0 L	+92% DT-180 A

Source

Source