AGCO-ALLIS 9785 vs John Deere 8310

11 material differences · fewer than 12

Tractor one

1998–2001

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 9785 and the 8310 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9785 and John Deere 8310, field by field
Field	9785	8310	Gap
Engine
Engine power, claimed claimed	227.8 hp	232 hp	—
Engine declared	INTERNATIONAL-NAVISTAR DTA-530	John Deere-PowerTech 6.081 HRW-15	differs
Displacement declared	—	8.13 L	—
Maximum torque declared	677 lb·ft · 918 N·m	741 lb·ft · 1,005 N·m	+9% 8310
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Oil-cooled wet multi-plate clutch	Pedal-operated hydraulic wet John Deere multi-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	31.8 gpm · 120.4 L/min	—
Pressure declared	3,046 psi · 210 bar	3,379 psi · 233 bar	+11% 8310
Three-point lift at ends declared	19,709 lb · 8,940 kg	11,645 lb · 5,282 kg	+69% 9785
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	18,801 lb · 8,528 kg	19,864 lb · 9,010 kg	+6% 8310
Maximum permissible mass declared	—	30,865 lb · 14,000 kg	—
Wheelbase declared	112.5 in · 2,858 mm	116.1 in · 2,950 mm	—
Length declared	203.0 in · 5,156 mm	216.0 in · 5,487 mm	+6% 8310
Width declared	98.2 in · 2,494 mm	118.6 in · 3,012 mm	+21% 8310
Height declared	121.0 in · 3,073 mm	121.1 in · 3,075 mm	—
Ground clearance declared	17.5 in · 445 mm	15.9 in · 405 mm	+10% 9785
Fuel tank declared	479.7 qt · 454.0 L	540.0 qt · 511.0 L	+13% 8310

Source

Source