AGCO-ALLIS 9785 vs John Deere 8300 T
9 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (33%); the drive differs (4WD; Tracks); the 8300 T is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 9785 | 8300 T | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 227.8 hp | 227.0 hp | — |
| Engine declared | INTERNATIONAL-NAVISTAR DTA-530 | John Deere-PowerTech 6.081 HRW-09 | differs |
| Displacement declared | — | 8.13 L | — |
| Maximum torque declared | 677 lb·ft · 918 N·m | 689 lb·ft · 934 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Oil-cooled wet multi-plate clutch | Pedal operated hydraulic wet John Deere multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Closed centre | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | — | 31.5 gpm · 119.2 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Three-point lift at ends declared | 19,709 lb · 8,940 kg | 15,763 lb · 7,150 kg | +25% 9785 |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 18,801 lb · 8,528 kg | 25,009 lb · 11,344 kg | +33% 8300 T |
| Wheelbase declared | 112.5 in · 2,858 mm | 89.0 in · 2,260 mm | +26% 9785 |
| Length declared | 203.0 in · 5,156 mm | 216.0 in · 5,487 mm | +6% 8300 T |
| Width declared | 98.2 in · 2,494 mm | 102.0 in · 2,591 mm | — |
| Height declared | 121.0 in · 3,073 mm | 123.4 in · 3,135 mm | — |
| Ground clearance declared | 17.5 in · 445 mm | 14.2 in · 360 mm | +24% 9785 |
| Fuel tank declared | 479.7 qt · 454.0 L | 519.9 qt · 492.0 L | +8% 8300 T |
AGCO-ALLIS 9785 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 9785”
- Source: Traktorenlexikon, “AGCO-Allis 9775”
John Deere 8300 T sources
Source
- Source: Traktorenlexikon, “John Deere 8300T”
- Source: OECD test report 1782, 1998