AGCO-ALLIS 9785 vs John Deere 4960
5 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1998–2001; 1992–1994). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
5 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | 9785 | 4960 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 227.8 hp | 227.0 hp | — |
| Engine declared | INTERNATIONAL-NAVISTAR DTA-530 | John Deere 6.076 ARW-03 | differs |
| Displacement declared | — | 7.63 L | — |
| Maximum torque declared | 677 lb·ft · 918 N·m | 670 lb·ft · 908 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Oil-cooled wet multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Closed centre | — |
| Pump flow declared | — | 30.6 gpm · 115.8 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | 3,002 psi · 207 bar | — |
| Three-point lift at ends declared | 19,709 lb · 8,940 kg | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 18,801 lb · 8,528 kg | 18,369 lb · 8,332 kg | — |
| Wheelbase declared | 112.5 in · 2,858 mm | 116.9 in · 2,970 mm | — |
| Length declared | 203.0 in · 5,156 mm | 213.4 in · 5,420 mm | — |
| Width declared | 98.2 in · 2,494 mm | 118.0 in · 2,997 mm | +20% 4960 |
| Height declared | 121.0 in · 3,073 mm | 118.9 in · 3,020 mm | — |
| Ground clearance declared | 17.5 in · 445 mm | 16.5 in · 420 mm | +6% 9785 |
| Fuel tank declared | 479.7 qt · 454.0 L | 407.9 qt · 386.0 L | +18% 9785 |
AGCO-ALLIS 9785 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 9785”
- Source: Traktorenlexikon, “AGCO-Allis 9775”
John Deere 4960 sources
Source
- Source: Traktorenlexikon, “John Deere 4960”