AGCO-ALLIS 9785 vs Agco DT-200 A

8 material differences · fewer than 12

Tractor one

1998–2001

No measured PTO figure

Tractor two

2005–2008

No measured PTO figure

Which should you choose?

Read our verdict on the 9785 and the DT-200 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9785 and Agco DT-200 A, field by field
Field	9785	DT-200 A	Gap
Engine
Engine power, claimed claimed	227.8 hp	231.7 hp	—
Engine declared	INTERNATIONAL-NAVISTAR DTA-530	SISU-DIESEL 74 ETA	differs
Displacement declared	—	7.37 L	—
Maximum torque declared	677 lb·ft · 918 N·m	682 lb·ft · 924 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Oil-cooled wet multi-plate clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	37.4 gpm · 141.5 L/min	—
Pressure declared	3,046 psi · 210 bar	3,336 psi · 230 bar	+10% DT-200 A
Three-point lift at ends declared	19,709 lb · 8,940 kg	14,648 lb · 6,644 kg	+35% 9785
Rear PTO speeds declared	1000 rpm	540/1000/540E rpm	differs
Weight & dimensions
Unladen weight declared	18,801 lb · 8,528 kg	19,136 lb · 8,680 kg	—
Maximum permissible mass declared	—	30,865 lb · 14,000 kg	—
Wheelbase declared	112.5 in · 2,858 mm	121.1 in · 3,075 mm	+8% DT-200 A
Length declared	203.0 in · 5,156 mm	206.3 in · 5,240 mm	—
Width declared	98.2 in · 2,494 mm	100.4 in · 2,550 mm	—
Height declared	121.0 in · 3,073 mm	121.7 in · 3,090 mm	—
Ground clearance declared	17.5 in · 445 mm	19.7 in · 500 mm	+12% DT-200 A
Fuel tank declared	479.7 qt · 454.0 L	697.4 qt · 660.0 L	+45% DT-200 A

Source

Source