AGCO-ALLIS 9775 vs Fendt Favorit 822 LSE

7 material differences · fewer than 12

Tractor one

1998–2001

No measured PTO figure

Tractor two

1993–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 9775 and the Favorit 822 LSE → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9775 and Fendt Favorit 822 LSE, field by field
Field	9775	Favorit 822 LSE	Gap
Engine
Engine power, claimed claimed	204.1 hp	207 hp	—
Engine declared	INTERNATIONAL-NAVISTAR DTA-530	MAN D 0826 LE 522	differs
Displacement declared	—	6.87 L	—
Maximum torque declared	—	661 lb·ft · 896 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Oil-cooled wet multi-plate clutch	Wet multi-disc clutch as driving clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	27.6 gpm · 104.4 L/min	—
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	19,709 lb · 8,940 kg	—	—
Rear PTO speeds declared	1000 rpm	750 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	18,786 lb · 8,521 kg	16,954 lb · 7,690 kg	+11% 9775
Maximum permissible mass declared	—	26,455 lb · 12,000 kg	—
Wheelbase declared	112.5 in · 2,858 mm	111.8 in · 2,840 mm	—
Length declared	203.0 in · 5,156 mm	194.5 in · 4,940 mm	—
Width declared	98.2 in · 2,494 mm	100.4 in · 2,550 mm	—
Height declared	121.0 in · 3,073 mm	121.9 in · 3,095 mm	—
Ground clearance declared	17.5 in · 445 mm	23.8 in · 605 mm	+36% Favorit 822 LSE
Turning radius, braked declared	—	17.7 ft · 5.40 m	—
Fuel tank declared	479.7 qt · 454.0 L	391.0 qt · 370 L	+23% 9775

Source

Source