AGCO-ALLIS 9775 or Fendt 924 Vario?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 9775 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 924 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt 924 Vario suits road haulage better on this data: 25% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for AGCO-ALLIS 9775 and Fendt 924 Vario, with the call on each
Question9775924 VarioCall
Which puts more power through the PTO shaft?152.2 kW (204.1 hp)Traktorenlexikon, “AGCO-Allis 9775”154 kW (207 hp)Traktorenlexikon, “Fendt 924 Vario”Not comparableNot comparable on power at the PTO shaft: the 9775 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 924 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 9775 and the 924 Vario.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 9775 and the 924 Vario.
Which pumps more oil for implements?No figureNo call on hydraulic flow: no figure on record for the 9775 and the 924 Vario.
Which lifts more on the three-point hitch?8,940 kg (19,709 lb)Traktorenlexikon, “AGCO-Allis 9775”No figureNo call on three-point lift: no figure on record for the 924 Vario.
Which is heavier, for traction?8,521 kg (18,786 lb)Traktorenlexikon, “AGCO-Allis 9775”10,080 kg (22,223 lb)Traktorenlexikon, “Fendt 924 Vario”Ahead (a fact, not an advantage)The Fendt 924 Vario is 18% heavier (1,559 kg / 3,437 lb) than the AGCO-ALLIS 9775 (both unladen weight, as stated by the source).
Which may carry more ballast and load?15,000 kg (33,069 lb) to 18,000 kg (39,683 lb)Traktorenlexikon, “Fendt 924 Vario”No figureNo call on maximum permissible mass: no figure on record for the 9775.
Which has the wider choice of gears?18 to 36 forwardTraktorenlexikon, “AGCO-Allis 9775”Stepless (CVT)Traktorenlexikon, “Fendt 924 Vario”DifferTransmissions differ in kind: the AGCO-ALLIS 9775 has 18 to 36 forward gears and the Fendt 924 Vario is stepless (CVT) — not called.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 9775 and the 924 Vario.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “AGCO-Allis 9775”50 km/h (31.1 mph) to 60 km/h (37.3 mph)Traktorenlexikon, “Fendt 924 Vario”AheadThe Fendt 924 Vario has 25% more top speed (10.0 km/h / 6.2 mph) than the AGCO-ALLIS 9775 (both top speed forward, as stated by the source).
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “AGCO-Allis 9775”No figureNo call on PTO speeds: no standard PTO speed stated for the 924 Vario.
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the 9775 and the 924 Vario.
Which drives on both axles?4WDTraktorenlexikon, “AGCO-Allis 9775”4WDTraktorenlexikon, “Fendt 924 Vario”; OECD test report 2545, 2010EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1998–20012006–2014Ahead (a fact, not an advantage)The Fendt 924 Vario is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt 924 Vario is 18% heavier (1,559 kg / 3,437 lb) than the AGCO-ALLIS 9775 (both unladen weight, as stated by the source).
  • The Fendt 924 Vario has 25% more top speed (10.0 km/h / 6.2 mph) than the AGCO-ALLIS 9775 (both top speed forward, as stated by the source).
  • The Fendt 924 Vario is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Transmissions differ in kind: the AGCO-ALLIS 9775 has 18 to 36 forward gears and the Fendt 924 Vario is stepless (CVT) — not called.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 9775 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 924 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources