AGCO-ALLIS 9775 or Fendt 820 Vario?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 9775 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 820 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt 820 Vario suits road haulage better on this data: 25% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for AGCO-ALLIS 9775 and Fendt 820 Vario, with the call on each
Question9775820 VarioCall
Which puts more power through the PTO shaft?152.2 kW (204.1 hp)Traktorenlexikon, “AGCO-Allis 9775”151 kW (202 hp)Traktorenlexikon, “Fendt 820 Vario”Not comparableNot comparable on power at the PTO shaft: the 9775 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 820 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 9775 and the 820 Vario.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 9775 and the 820 Vario.
Which pumps more oil for implements?No figureNo call on hydraulic flow: no figure on record for the 9775 and the 820 Vario.
Which lifts more on the three-point hitch?8,940 kg (19,709 lb)Traktorenlexikon, “AGCO-Allis 9775”9,259 kg (20,413 lb)Traktorenlexikon, “Fendt 820 Vario”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?8,521 kg (18,786 lb)Traktorenlexikon, “AGCO-Allis 9775”7,185 kg (15,840 lb)Traktorenlexikon, “Fendt 820 Vario”Ahead (a fact, not an advantage)The AGCO-ALLIS 9775 is 19% heavier (1,336 kg / 2,945 lb) than the Fendt 820 Vario (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 9775 and the 820 Vario.
Which has the wider choice of gears?18 to 36 forwardTraktorenlexikon, “AGCO-Allis 9775”Stepless (CVT)Traktorenlexikon, “Fendt 820 Vario”DifferTransmissions differ in kind: the AGCO-ALLIS 9775 has 18 to 36 forward gears and the Fendt 820 Vario is stepless (CVT) — not called.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 9775 and the 820 Vario.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “AGCO-Allis 9775”50 km/h (31.1 mph)Traktorenlexikon, “Fendt 820 Vario”AheadThe Fendt 820 Vario has 25% more top speed (10.0 km/h / 6.2 mph) than the AGCO-ALLIS 9775 (both top speed forward, as stated by the source).
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “AGCO-Allis 9775”540/540E/1000 rpmTraktorenlexikon, “Fendt 820 Vario”AheadThe Fendt 820 Vario offers 540 rpm at the PTO, which the AGCO-ALLIS 9775 does not (as stated by the sources).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the 9775 and the 820 Vario.
Which drives on both axles?4WDTraktorenlexikon, “AGCO-Allis 9775”4WDTraktorenlexikon, “Fendt 820 Vario”; OECD test report 2535, 2010EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1998–20012006–2011Ahead (a fact, not an advantage)The Fendt 820 Vario is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The AGCO-ALLIS 9775 is 19% heavier (1,336 kg / 2,945 lb) than the Fendt 820 Vario (both unladen weight, as stated by the source).
  • The Fendt 820 Vario has 25% more top speed (10.0 km/h / 6.2 mph) than the AGCO-ALLIS 9775 (both top speed forward, as stated by the source).
  • The Fendt 820 Vario offers 540 rpm at the PTO, which the AGCO-ALLIS 9775 does not (as stated by the sources).
  • The Fendt 820 Vario is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Transmissions differ in kind: the AGCO-ALLIS 9775 has 18 to 36 forward gears and the Fendt 820 Vario is stepless (CVT) — not called.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 9775 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 820 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources