4 material differences · fewer than 12

Tractor oneAGCO-ALLIS 97551998–2001No measured PTO figureTractor twoMassey Ferguson MF 82451999–2003No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (Two-wheel or four-wheel drive; 4WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

4 material differences · 4 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9755 and Massey Ferguson MF 8245, field by field
Field9755MF 8245Gap
Engine
Engine power, claimed claimed159.8 hp160.0 hp—
Engine declaredINTERNATIONAL-NAVISTAR DT-530——
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h24.9 mph · 40 km/hdiffers
Clutch declaredOil-cooled wet multi-disc clutchWet multi-disc clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredClosed centre——
Pressure declared3,046 psi · 210 bar——
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared17,302 lb · 7,848 kg18,799 lb · 8,527 kg+9% MF 8245
Wheelbase declared112.5 in · 2,858 mm120.9 in · 3,070 mm+7% MF 8245
Length declared203.0 in · 5,156 mm201.2 in · 5,110 mm—
Width declared98.2 in · 2,494 mm97.6 in · 2,480 mm—
Fuel tank declared479.7 qt · 454.0 L——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

AGCO-ALLIS 9755 sources

Source
  • Source: Traktorenlexikon, “AGCO-Allis 9755”

Massey Ferguson MF 8245 sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 8245”