AGCO-ALLIS 9755 vs Fendt Favorit 716 Vario

9 material differences · fewer than 12

Tractor one

AGCO-ALLIS 9755

1998–2001

No measured PTO figure

Tractor two

Fendt Favorit 716 Vario

from 1998

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (35%); the drive differs (Two-wheel or four-wheel drive; 4WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 3 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9755 and Fendt Favorit 716 Vario, field by field
Field9755Favorit 716 VarioGap
Engine
Engine power, claimed claimed159.8 hp158 hp
Engine declaredINTERNATIONAL-NAVISTAR DT-530Deutz AG BF6M 2013 Cdiffers
Displacement declared5.70 L
Maximum torque declared558 lb·ft · 757.0 N·m
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h31.1 mph · 50 km/hdiffers
Clutch declaredOil-cooled wet multi-disc clutchMulti-plate clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredClosed centre
Pump flow declared29.1 gpm · 110 L/min
Pressure declared3,046 psi · 210 bar2,901 psi · 200 bar
Three-point lift at ends declared16,100 lb · 7,303 kg
Rear PTO speeds declared540/1000 rpm540/750/1000 rpmdiffers
Weight & dimensions
Unladen weight declared17,302 lb · 7,848 kg12,787–14,451 lb · 5,800–6,555 kgdiffers
Maximum permissible mass declared24,251 lb · 11,000 kg
Wheelbase declared112.5 in · 2,858 mm106.3 in · 2,700 mm+6% 9755
Length declared203.0 in · 5,156 mm182.7–183.2 in · 4,640–4,653 mmdiffers
Width declared98.2 in · 2,494 mm101.2–102.0 in · 2,570–2,590 mm
Height declared121.0 in · 3,073 mm112.2–116.7 in · 2,850–2,964 mmdiffers
Ground clearance declared22.7 in · 576 mm
Turning radius, braked declared16.1 ft · 4.90 m
Fuel tank declared479.7 qt · 454.0 L322.3 qt · 305 L+49% 9755

AGCO-ALLIS 9755 sources

Source
  • Source: Traktorenlexikon, “AGCO-Allis 9755”

Fendt Favorit 716 Vario sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 716 Vario”
  • Source: OECD test report 1884, 2000