AGCO-ALLIS 9755 vs Agco DT-160
5 material differences · fewer than 12
Which should you choose?
Read our verdict on the 9755 and the DT-160 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 9755 | DT-160 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 159.8 hp | 159.8 hp | — |
| Engine declared | INTERNATIONAL-NAVISTAR DT-530 | CUMMINS C-8.3 T | differs |
| Displacement declared | — | 8.27 L | — |
| Maximum torque declared | — | 538 lb·ft · 729 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Oil-cooled wet multi-disc clutch | Pedal operated wet VALEO multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | — | 30.8 gpm · 116.6 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | 3,046 psi · 210 bar | — |
| Three-point lift at ends declared | 16,100 lb · 7,303 kg | 16,094 lb · 7,300 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 17,302 lb · 7,848 kg | 19,010 lb · 8,623 kg | +10% DT-160 |
| Wheelbase declared | 112.5 in · 2,858 mm | 121.0 in · 3,073 mm | +8% DT-160 |
| Length declared | 203.0 in · 5,156 mm | 203.0 in · 5,156 mm | — |
| Width declared | 98.2 in · 2,494 mm | 98.2 in · 2,494 mm | — |
| Height declared | 121.0 in · 3,073 mm | 120.0 in · 3,048 mm | — |
| Ground clearance declared | — | 18.0 in · 457 mm | — |
| Fuel tank declared | 479.7 qt · 454.0 L | 479.7 qt · 454.0 L | — |
AGCO-ALLIS 9755 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 9755”
Agco DT-160 sources
Source
- Source: Traktorenlexikon, “AGCO DT 160”
- Source: Traktorenlexikon, “White 8510”