AGCO-ALLIS 9745 vs Massey Ferguson MF 8210 A

9 material differences · fewer than 12

Tractor one

1998–2001

No measured PTO figure

Tractor two

1999–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 9745 and the MF 8210 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9745 and Massey Ferguson MF 8210 A, field by field
Field	9745	MF 8210 A	Gap
Engine
Engine power, claimed claimed	145.0 hp	143.1 hp	—
Engine declared	SISU-DIESEL 66.6 TW	Perkins 1006.60 TW	differs
Displacement declared	6.59 L	5.99 L	+10% 9745
Maximum torque declared	498 lb·ft · 675 N·m	437 lb·ft · 593 N·m	+14% 9745
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Oil-cooled wet multi-disc clutch	Pedal operated, hydraulic VALEO multi-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	29.7 gpm · 112.4 L/min	30.9 gpm · 116.8 L/min	—
Pressure declared	3,046 psi · 210 bar	3,336 psi · 230 bar	+10% MF 8210 A
Three-point lift at ends declared	14,760 lb · 6,695 kg	19,334 lb · 8,770 kg	+31% MF 8210 A
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	15,130 lb · 6,863 kg	14,573 lb · 6,610 kg	—
Maximum permissible mass declared	—	26,455 lb · 12,000 kg	—
Wheelbase declared	117.5 in · 2,985 mm	111.7 in · 2,838 mm	—
Length declared	203.0 in · 5,156 mm	198.8 in · 5,050 mm	—
Width declared	98.4 in · 2,499 mm	84.2 in · 2,138 mm	+17% 9745
Height declared	120.0 in · 3,048 mm	126.0 in · 3,200 mm	—
Ground clearance declared	—	19.4 in · 493 mm	—
Fuel tank declared	399.4 qt · 378.0 L	433.2 qt · 410.0 L	+8% MF 8210 A

Source

Source