AGCO-ALLIS 9735 or Massey Ferguson MF 3125 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 9735 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3125 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The AGCO-ALLIS 9735 suits loader and hydraulic implement work better on this data: 123% (62.1 L/min / 16.4 gpm) more hydraulic flow and 24% (1,315 kg / 2,899 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 9735 | MF 3125 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 93.4 kW (125.3 hp)Traktorenlexikon, “AGCO-Allis 9735” | 92.7 kW (124.3 hp)Traktorenlexikon, “Massey Ferguson MF 3125” | Not comparableNot comparable on power at the PTO shaft: the 9735 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3125 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 9735 and the MF 3125 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 9735 and the MF 3125 (A). |
| Which pumps more oil for implements? | 112.4 L/min (29.7 gpm)Traktorenlexikon, “AGCO-Allis 9735” | 50.3 L/min (13.3 gpm)Traktorenlexikon, “Massey Ferguson MF 3125” | AheadThe AGCO-ALLIS 9735 has 123% more hydraulic flow (62.1 L/min / 16.4 gpm) than the Massey Ferguson 3125 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 6,695 kg (14,760 lb)Traktorenlexikon, “AGCO-Allis 9735” | 5,380 kg (11,861 lb)Traktorenlexikon, “Massey Ferguson MF 3125” | AheadThe AGCO-ALLIS 9735 has 24% more lift (1,315 kg / 2,899 lb) than the Massey Ferguson 3125 (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 6,818 kg (15,031 lb)Traktorenlexikon, “AGCO-Allis 9735” | 4,805 kg (10,593 lb)Traktorenlexikon, “Massey Ferguson MF 3125” | Ahead (a fact, not an advantage)The AGCO-ALLIS 9735 is 42% heavier (2,013 kg / 4,438 lb) than the Massey Ferguson 3125 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 8,500 kg (18,739 lb)Traktorenlexikon, “Massey Ferguson MF 3125” | No figureNo call on maximum permissible mass: no figure on record for the 9735. |
| Which has the wider choice of gears? | 32Traktorenlexikon, “AGCO-Allis 9735” | 16 to 32Traktorenlexikon, “Massey Ferguson MF 3125” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 9735 and the MF 3125 (A). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “AGCO-Allis 9735” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 3125” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “AGCO-Allis 9735” | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3125” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the 9735 and the MF 3125 (A). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “AGCO-Allis 9735” | Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 3125” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1998–2001 | 1990–1995 | Ahead (a fact, not an advantage)The AGCO-ALLIS 9735 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The AGCO-ALLIS 9735 has 123% more hydraulic flow (62.1 L/min / 16.4 gpm) than the Massey Ferguson 3125 (A) (both pump flow, as stated by the source).
- The AGCO-ALLIS 9735 has 24% more lift (1,315 kg / 2,899 lb) than the Massey Ferguson 3125 (A) (both lift at the hitch ends, as stated by the source).
- The AGCO-ALLIS 9735 is 42% heavier (2,013 kg / 4,438 lb) than the Massey Ferguson 3125 (A) (both unladen weight, as stated by the source).
- The AGCO-ALLIS 9735 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 9735 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3125 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources