AGCO-ALLIS 9735 or Deutz-Fahr Agrotron 130?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 9735 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 9735 | Agrotron 130 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 93.4 kW (125.3 hp)Traktorenlexikon, “AGCO-Allis 9735” | 94.2 kW (126.3 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 130” | Not comparableNot comparable on power at the PTO shaft: the 9735 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 9735 and the Agrotron 130. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 9735 and the Agrotron 130. |
| Which pumps more oil for implements? | 112.4 L/min (29.7 gpm)Traktorenlexikon, “AGCO-Allis 9735” | 83.0 L/min (21.9 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 130” | AheadThe AGCO-ALLIS 9735 has 35% more hydraulic flow (29.4 L/min / 7.8 gpm) than the Deutz-Fahr Agrotron 130 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 6,695 kg (14,760 lb)Traktorenlexikon, “AGCO-Allis 9735” | 9,240 kg (20,371 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 130” | AheadThe Deutz-Fahr Agrotron 130 has 38% more lift (2,545 kg / 5,611 lb) than the AGCO-ALLIS 9735 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 6,818 kg (15,031 lb)Traktorenlexikon, “AGCO-Allis 9735” | 5,710 kg (12,588 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 130” | Ahead (a fact, not an advantage)The AGCO-ALLIS 9735 is 19% heavier (1,108 kg / 2,443 lb) than the Deutz-Fahr Agrotron 130 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 9,000 kg (19,842 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 130” | No figureNo call on maximum permissible mass: no figure on record for the 9735. |
| Which has the wider choice of gears? | 32Traktorenlexikon, “AGCO-Allis 9735” | 24Traktorenlexikon, “Deutz-Fahr Agrotron 130” | AheadThe AGCO-ALLIS 9735 has 33% more forward gears (8 gears) than the Deutz-Fahr Agrotron 130 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 9735 and the Agrotron 130. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “AGCO-Allis 9735” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 130” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “AGCO-Allis 9735” | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 130” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Deutz-Fahr Agrotron 130” | No figureNo call on PTO independence: not stated for the 9735. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “AGCO-Allis 9735” | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron 130” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1998–2001 | 2003–2004 | Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 130 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The AGCO-ALLIS 9735 has 35% more hydraulic flow (29.4 L/min / 7.8 gpm) than the Deutz-Fahr Agrotron 130 (both pump flow, as stated by the source).
- The Deutz-Fahr Agrotron 130 has 38% more lift (2,545 kg / 5,611 lb) than the AGCO-ALLIS 9735 (both lift at the hitch ends, as stated by the source).
- The AGCO-ALLIS 9735 is 19% heavier (1,108 kg / 2,443 lb) than the Deutz-Fahr Agrotron 130 (both unladen weight, as stated by the source).
- The AGCO-ALLIS 9735 has 33% more forward gears (8 gears) than the Deutz-Fahr Agrotron 130 (both forward gears, as stated by the source).
- The Deutz-Fahr Agrotron 130 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 9735 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources