AGCO-ALLIS 9695 or Case-IH Puma 195?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 9695 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Puma 195 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Case-IH Puma 195 suits loader and hydraulic implement work better on this data: 73% (56.8 L/min / 15.0 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 9695 | Puma 195 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 145.6 kW (195.3 hp)Traktorenlexikon, “AGCO-Allis 9695” | 144.9 kW (194.3 hp)Traktorenlexikon, “Case-IH Puma 195” | Not comparableNot comparable on power at the PTO shaft: the 9695 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Puma 195 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 9695 and the Puma 195. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 9695 and the Puma 195. |
| Which pumps more oil for implements? | 78.0 L/min (20.6 gpm)Traktorenlexikon, “AGCO-Allis 9695” | 134.8 L/min (35.6 gpm)Traktorenlexikon, “Case-IH Puma 195” | AheadThe Case-IH Puma 195 has 73% more hydraulic flow (56.8 L/min / 15.0 gpm) than the AGCO-ALLIS 9695 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,707 kg (8,173 lb)Traktorenlexikon, “AGCO-Allis 9695” | — | No figureNo call on three-point lift: no figure on record for the Puma 195. |
| Which is heavier, for traction? | 8,433 kg (18,592 lb)Traktorenlexikon, “AGCO-Allis 9695” | 8,000 kg (17,637 lb)Traktorenlexikon, “Case-IH Puma 195” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 12,000 kg (26,455 lb)Traktorenlexikon, “Case-IH Puma 195” | No figureNo call on maximum permissible mass: no figure on record for the 9695. |
| Which has the wider choice of gears? | 18Traktorenlexikon, “AGCO-Allis 9695” | 18 to 28Traktorenlexikon, “Case-IH Puma 195” | Sources disagreeNo call on forward gears: sources disagree on the figure for the Puma 195. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 9695 and the Puma 195. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “AGCO-Allis 9695” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Case-IH Puma 195” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “AGCO-Allis 9695” | 540E/1000 rpmTraktorenlexikon, “Case-IH Puma 195” | Sources disagreeNo call on PTO speeds: sources disagree on the PTO speeds of the Puma 195. |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “AGCO-Allis 9695” | independentTraktorenlexikon, “Case-IH Puma 195” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “AGCO-Allis 9695” | 4WDTraktorenlexikon, “Case-IH Puma 195”; OECD test report 2425, 2008 | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1994–1998 | 2007–2011 | Ahead (a fact, not an advantage)The Case-IH Puma 195 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Case-IH Puma 195 has 73% more hydraulic flow (56.8 L/min / 15.0 gpm) than the AGCO-ALLIS 9695 (both pump flow, as stated by the source).
- The Case-IH Puma 195 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 9695 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Puma 195 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No call on forward gears: sources disagree on the figure for the Puma 195.
- No call on PTO speeds: sources disagree on the PTO speeds of the Puma 195.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources