AGCO-ALLIS 9690 vs Hürlimann H-6200 Turbo

7 material differences · fewer than 12

Tractor one

1994–1995

No measured PTO figure

Tractor two

1982

No measured PTO figure

Which should you choose?

Read our verdict on the 9690 and the H-6200 Turbo → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9690 and Hürlimann H-6200 Turbo, field by field
Field	9690	H-6200 Turbo	Gap
Engine
Engine power, claimed claimed	195.3 hp	197.4 hp	—
Engine declared	K.H.D. BF6L 513 RC	Hürlimann H-115/6 Turbo	differs
Displacement declared	9.57 L	7.48 L	+28% 9690
Maximum torque declared	589 lb·ft · 798 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6 mph · 30 km/h	+33% 9690
Clutch declared	Hydraulically operated wet FUNK multi-plate clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	21.8 gpm · 82.5 L/min	17.2 gpm · 65.0 L/min	+27% 9690
Pressure declared	2,944 psi · 203 bar	—	—
Three-point lift at ends declared	8,173 lb · 3,707 kg	13,228 lb · 6,000 kg	+62% H-6200 Turbo
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	18,100 lb · 8,210 kg	18,739 lb · 8,500 kg	—
Maximum permissible mass declared	—	25,353 lb · 11,500 kg	—
Wheelbase declared	115.0 in · 2,921 mm	120.3 in · 3,055 mm	—
Length declared	200.0 in · 5,080 mm	195.7 in · 4,970 mm	—
Width declared	96.0 in · 2,438 mm	94.5 in · 2,400 mm	—
Height declared	121.0 in · 3,073 mm	120.9 in · 3,070 mm	—
Ground clearance declared	17.0 in · 432 mm	—	—
Turning radius, braked declared	14.6 ft · 4.45 m	—	—
Fuel tank declared	387.8 qt · 367.0 L	243.0 qt · 230.0 L	+60% 9690

Source

Source