AGCO-ALLIS 9690 vs Deutz-Fahr Agrotron 200 MK3

10 material differences · fewer than 12

Tractor one

1994–1995

No measured PTO figure

Tractor two

2001–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 9690 and the Agrotron 200 MK3 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9690 and Deutz-Fahr Agrotron 200 MK3, field by field
Field	9690	Agrotron 200 MK3	Gap
Engine
Engine power, claimed claimed	195.3 hp	197.4 hp	—
Engine declared	K.H.D. BF6L 513 RC	Deutz BF6M 1013 E	differs
Displacement declared	9.57 L	7.15 L	+34% 9690
Maximum torque declared	589 lb·ft · 798 N·m	558 lb·ft · 756 N·m	+6% 9690
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Hydraulically operated wet FUNK multi-plate clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	21.8 gpm · 82.5 L/min	31.1 gpm · 117.9 L/min	+43% Agrotron 200 MK3
Pressure declared	2,944 psi · 203 bar	—	—
Three-point lift at ends declared	8,173 lb · 3,707 kg	22,046 lb · 10,000 kg	+170% Agrotron 200 MK3
Rear PTO speeds declared	1000 rpm	540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	18,100 lb · 8,210 kg	16,446 lb · 7,460 kg	+10% 9690
Maximum permissible mass declared	—	26,455 lb · 12,000 kg	—
Wheelbase declared	115.0 in · 2,921 mm	119.3 in · 3,030 mm	—
Length declared	200.0 in · 5,080 mm	187.3 in · 4,757 mm	+7% 9690
Width declared	96.0 in · 2,438 mm	97.6 in · 2,480 mm	—
Height declared	121.0 in · 3,073 mm	120.5 in · 3,060 mm	—
Ground clearance declared	17.0 in · 432 mm	23.6 in · 600 mm	+39% Agrotron 200 MK3
Turning radius, braked declared	14.6 ft · 4.45 m	—	—
Fuel tank declared	387.8 qt · 367.0 L	401.5 qt · 380 L	—

Source

Source