9 material differences · fewer than 12
Tractor oneAGCO-ALLIS 96751994–1998No measured PTO figureTractor twoWHITE 4-1751979–1983No measured PTO figure
Which should you choose?
Read our verdict on the 9675 and the 4-175 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 9675 | 4-175 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 174.6 hp | 174.6 hp | — |
| Engine declared | DETROIT-DIESEL DT-530 | CATERPILLAR 3208/V-8 | differs |
| Displacement declared | 8.71 L | 10.43 L | +20% 4-175 |
| Maximum torque declared | 601 lb·ft · 815 N·m | — | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6 mph · 30 km/h | +33% 9675 |
| Clutch declared | electrohydraulically actuated wet FUNK multi-disc clutch | Pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Closed centre | — |
| Pump flow declared | 28.1 gpm · 106.4 L/min | 22.0 gpm · 83.3 L/min | +28% 9675 |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 14,559 lb · 6,604 kg | 16,535 lb · 7,500 kg | +14% 4-175 |
| Wheelbase declared | 123.2 in · 3,129 mm | 118.4 in · 3,007 mm | — |
| Length declared | 200.0 in · 5,080 mm | 244.0 in · 6,198 mm | +22% 4-175 |
| Width declared | 98.0–115.0 in · 2,489–2,921 mm | 80.6 in · 2,048 mm | differs |
| Ground clearance declared | 23.0 in · 584 mm | 27.3 in · 694 mm | +19% 4-175 |
| Turning radius, braked declared | 13.8 ft · 4.20 m | — | — |
| Fuel tank declared | 387.8 qt · 367.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 9675 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 9675”
WHITE 4-175 sources
Source
- Source: Traktorenlexikon, “White 4-175”
- Source: Traktorenlexikon, “White 2-180”