10 material differences · fewer than 12
Tractor oneAGCO-ALLIS 96701994–1995No measured PTO figureTractor twoFord TW-30 (A)1979–1983No measured PTO figure
Which should you choose?
Read our verdict on the 9670 and the TW-30 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 9670 | TW-30 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 174.6 hp | 174.6 hp | — |
| Engine declared | K.H.D. BF6L 513 RC | Ford 401 DF-TI | differs |
| Displacement declared | 9.57 L | 6.58 L | +45% 9670 |
| Maximum torque declared | 550 lb·ft · 746 N·m | 494 lb·ft · 670 N·m | +11% 9670 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Hydraulically operated wet FUNK multi-disc clutch | pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 19.5 gpm · 73.8 L/min | — | — |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 16,100 lb · 7,303 kg | 14,625 lb · 6,634 kg | +10% 9670 |
| Maximum permissible mass declared | — | 19,820 lb · 8,990 kg | — |
| Wheelbase declared | 120.5 in · 3,061 mm | 110.5 in · 2,807 mm | +9% 9670 |
| Length declared | 200.0 in · 5,080 mm | 190.9 in · 4,849 mm | — |
| Width declared | 96.0–140.0 in · 2,438–3,556 mm | 83.6 in · 2,124 mm | differs |
| Ground clearance declared | 23.0 in · 584 mm | 25.2 in · 640 mm | +10% TW-30 (A) |
| Turning radius, braked declared | 13.8 ft · 4.20 m | 13.3 ft · 4.06 m | — |
| Fuel tank declared | 387.8 qt · 367.0 L | 299.9 qt · 283.8 L | +29% 9670 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 9670 sources
- Source: Traktorenlexikon, “AGCO-Allis 9670”
Ford TW-30 (A) sources
- Source: Traktorenlexikon, “Ford TW 30”