7 material differences · fewer than 12
Tractor oneAGCO-ALLIS 96701994–1995No measured PTO figureTractor twoAGCO-ALLIS 96751994–1998No measured PTO figure
Which should you choose?
Read our verdict on the 9670 and the 9675 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | 9670 | 9675 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 174.6 hp | 174.6 hp | — |
| Engine declared | K.H.D. BF6L 513 RC | DETROIT-DIESEL DT-530 | differs |
| Displacement declared | 9.57 L | 8.71 L | +10% 9670 |
| Maximum torque declared | 550 lb·ft · 746 N·m | 601 lb·ft · 815 N·m | +9% 9675 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | Hydraulically operated wet FUNK multi-disc clutch | electrohydraulically actuated wet FUNK multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Closed centre | — |
| Pump flow declared | 19.5 gpm · 73.8 L/min | 28.1 gpm · 106.4 L/min | +44% 9675 |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 16,100 lb · 7,303 kg | 14,559 lb · 6,604 kg | +11% 9670 |
| Wheelbase declared | 120.5 in · 3,061 mm | 123.2 in · 3,129 mm | — |
| Length declared | 200.0 in · 5,080 mm | 200.0 in · 5,080 mm | — |
| Width declared | 96.0–140.0 in · 2,438–3,556 mm | 98.0–115.0 in · 2,489–2,921 mm | differs |
| Ground clearance declared | 23.0 in · 584 mm | 23.0 in · 584 mm | — |
| Turning radius, braked declared | 13.8 ft · 4.20 m | 13.8 ft · 4.20 m | — |
| Fuel tank declared | 387.8 qt · 367.0 L | 387.8 qt · 367.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 9670 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 9670”
AGCO-ALLIS 9675 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 9675”