AGCO-ALLIS 9655 or Case-IH Puma 155?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 9655 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Puma 155 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Case-IH Puma 155 suits loader and hydraulic implement work better on this data: 35% (26.8 L/min / 7.1 gpm) more hydraulic flow and 208% (5,575 kg / 12,291 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for AGCO-ALLIS 9655 and Case-IH Puma 155, with the call on each
Question9655Puma 155Call
Which puts more power through the PTO shaft?115.5 kW (154.9 hp)Traktorenlexikon, “AGCO-Allis 9655”116.2 kW (155.8 hp)Traktorenlexikon, “Case-IH Puma 155”Not comparableNot comparable on power at the PTO shaft: the 9655 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Puma 155 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 9655 and the Puma 155.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 9655 and the Puma 155.
Which pumps more oil for implements?77.6 L/min (20.5 gpm)Traktorenlexikon, “AGCO-Allis 9655”104.4 L/min (27.6 gpm)Traktorenlexikon, “Case-IH Puma 155”AheadThe Case-IH Puma 155 has 35% more hydraulic flow (26.8 L/min / 7.1 gpm) than the AGCO-ALLIS 9655 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,682 kg (5,913 lb)Traktorenlexikon, “AGCO-Allis 9655”8,257 kg (18,204 lb)Traktorenlexikon, “Case-IH Puma 155”AheadThe Case-IH Puma 155 has 208% more lift (5,575 kg / 12,291 lb) than the AGCO-ALLIS 9655 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?7,350 kg (16,204 lb)Traktorenlexikon, “AGCO-Allis 9655”6,615 kg (14,584 lb)Traktorenlexikon, “Case-IH Puma 155”Ahead (a fact, not an advantage)The AGCO-ALLIS 9655 is 11% heavier (735 kg / 1,620 lb) than the Case-IH Puma 155 (both unladen weight, as stated by the source).
Which may carry more ballast and load?—10,500 kg (23,149 lb)Traktorenlexikon, “Case-IH Puma 155”No figureNo call on maximum permissible mass: no figure on record for the 9655.
Which has the wider choice of gears?18Traktorenlexikon, “AGCO-Allis 9655”18 to 28Traktorenlexikon, “Case-IH Puma 155”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 9655 and the Puma 155.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “AGCO-Allis 9655”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Case-IH Puma 155”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “AGCO-Allis 9655”540/1000 rpmTraktorenlexikon, “Case-IH Puma 155”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “AGCO-Allis 9655”independentTraktorenlexikon, “Case-IH Puma 155”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “AGCO-Allis 9655”4WDTraktorenlexikon, “Case-IH Puma 155”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1994–19982007–2011Ahead (a fact, not an advantage)The Case-IH Puma 155 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Case-IH Puma 155 has 35% more hydraulic flow (26.8 L/min / 7.1 gpm) than the AGCO-ALLIS 9655 (both pump flow, as stated by the source).
  • The Case-IH Puma 155 has 208% more lift (5,575 kg / 12,291 lb) than the AGCO-ALLIS 9655 (both lift at the hitch ends, as stated by the source).
  • The AGCO-ALLIS 9655 is 11% heavier (735 kg / 1,620 lb) than the Case-IH Puma 155 (both unladen weight, as stated by the source).
  • The Case-IH Puma 155 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 9655 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Puma 155 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources